stunthanger.com

General control line discussion => Open Forum => Topic started by: Mike Lauerman on March 09, 2013, 04:54:12 PM

Title: Veco Mustang canopy
Post by: Mike Lauerman on March 09, 2013, 04:54:12 PM

Got my new Veco Mustang today, from a friend. Kit is nearly complete, but no canopy.

Having plan printed (from a Zip file) but it will be next week before I can pick it up.

Anyone know if a Sig canopy will fit? And the length?

Or who is making that one?

Thanks in advance, just want to gather the rest before I start ass'y...

Title: Re: Veco Mustang canopy
Post by: Bill Little on March 09, 2013, 05:21:19 PM

Hi Mike,

I'll look and see if I have one.  I should have a couple.

BIG Bear
RNMM/AMM

Title: Re: Veco Mustang canopy
Post by: Mike Lauerman on March 09, 2013, 07:19:06 PM

Great, Bill.  Thanks... Wife Joey stated today that this airplane will be a 'start to finish' project. There are unfinished and 'works in progress' in the family hangar.

"This will not be one of them."  (shudder)  ~^

Title: Re: Veco Mustang canopy
Post by: Bart Klapinski on March 10, 2013, 02:47:12 PM

I use the old Veco Mustang canopy on my Tempests. RSM has the mold that I made directly from the Mustang canopy. Perhaps he can make one for you.

                   Tempest

Title: Re: Veco Mustang canopy
Post by: Bart Klapinski on March 10, 2013, 02:50:40 PM

RSM Has the mold that I made directly from the Veco Canopy. Perhaps he will make one for you.

                        Tempst

Title: Re: Veco Mustang canopy
Post by: Bill Little on March 10, 2013, 03:19:34 PM

Eric does sell all the canopies for his kits.  Pretty reasonable prices and it might be the quickest way for you to get one, Mike.  At the present time, I am slower than a three toed sloth on tranquilizers................. ;D y1

BIG Bear
RNMM/AMM

Title: Re: Veco Mustang canopy
Post by: Mike Lauerman on March 10, 2013, 11:30:41 PM

Thanks, Brothers...

I'll contact Eric, sounds like the right thing to do.

Title: Re: Veco Mustang canopy
Post by: larry richards on March 10, 2013, 11:37:35 PM

Quote from: Mike Lauerman on March 10, 2013, 11:30:41 PM

Thanks, Brothers...

I'll contact Eric, sounds like the right thing to do.

I still have them if you need one.  Larry

Title: Re: Veco Mustang canopy
Post by: Bart Klapinski on March 11, 2013, 10:58:03 PM

Mike, I got your e-mail,but lost it before I read the entire message. I hope that RSM can give you a good clear canopy.

                          Cheers,
                                        Bart