Veco .19 prop nut?

[Duke.Johnson]

Anyone know the prop nut size for a veco .19?

[Tim Wescott]

Mine has an M6x1 (and 7/16" across the flats, just for grins no doubt).  Your local Ace hardware store should have one.

Does anyone know if all Enya 19's have the same thread, or might Duke have to anticipate a search?

[Allan Perret]

I have 2 Veco19's, both have 1/4-28 prop nuts.  Local hdwe item.

[Bill Little]

Mine has an M6x1 (and 7/16" across the flats, just for grins no doubt).  Your local Ace hardware store should have one.

Does anyone know if all Enya 19's have the same thread, or might Duke have to anticipate a search?

Uh, Timbo, he is talking about a VECO .19, not an Enya.

The Veco .19 has the ever present 1/4-28 standard American engine prop nut, used on about every American engine between .19 and .40. (even Sparkers! LOL!!)


BIG Bear
RNMM/AMM

[Tim Wescott]

Uh, Timbo, he is talking about a VECO .19, not an Enya.

The Veco .19 has the evr present 1/4-28 standard American engine prop nut.


BIG Bear
RNMM/AMM

Aaarrgh -- face-palm.

And to think that my #1 product for sale at Wescott Design Services is my brain-time!

[Allan Perret]

delete

[Tim Wescott]

Veco , Enya,  both have 4 letters and 2 vowels.  I can see how a brainiac might get them confused.
 

Allan, thank you.  I still think I need to put a tally-mark in the "dumba**" column, though.

(In retrospect, I'm really happy that I didn't get a job as a military pilot.  In the end I can do some really clever stuff, but it's usually by getting four out of five things right and then, in the fullness of time, correcting the foulups until eventually I've got something pretty nifty.  When one's foulups involve large smoking holes in the ground it's a bit harder to come back afterwards and fix them -- particularly if you're part of the hole.)

[Duke.Johnson]

Thanks guys.