stunthanger.com
General control line discussion => Open Forum => Topic started by: Steven Kientz on June 07, 2008, 06:44:31 AM
-
I saw my wife struggling to open an envelope the other day, was wondering if anyone had tried tyvek for hinges or reinforcment on tail feathers, fuselages?
Steve
-
Tyvek makes exceptional hinges. We've it for years in our pylon racers. There used to be a product on the market called redi hinge. Some of you might remember it. It was machined balsa with a hinge material inside. It was available in two thicknesses, 1/4" and 3/8". The hinge material in this product was Tyvel. We've never had it fail even under the most extreme conditions.
Arch
-
Just what is Tyvek and where would you get it?
Paul H^^
-
Paul:
We use massive amounts of Tyvek in our medical businesses. Packaging, drapes, gowns, etc. Check out this link. May give you additional information.
Jim
http://www2.dupont.com/Tyvek/en_US/sales_support/sales_support.html
-
Just what is Tyvek and where would you get it?
Paul H^^
Have you noticed what houses are now wrapped in before the siding is put on? Also the large mailing envelopes (white ones) are made of it.
-
thanks for the info, the way the economy is going I hate to throw away something that is useful. I find it hard to believe that we had junk mail show up in such an expensive envelope.
Thanks again
steve
-
Just what is Tyvek and where would you get it?
Paul H^^
Back when we used 5 1/4" and larger diskettes the premium envelopes were made from Tyvek. The stuff they put on houses is too thick but the old envelopes might work out fine. #^
-
The envolope and gown Tyvek is softer and I think thinner than the house wrap. The house wrap has like a sizing in it to make it somwhat stiff. The house wrap makes great Kites.