stunthanger.com

General control line discussion => Open Forum => Topic started by: Juan Valentin on August 04, 2016, 05:03:48 PM

Title: Transtar Autobody Technologies White Primer
Post by: Juan Valentin on August 04, 2016, 05:03:48 PM

      I have been working on my profile P-51D and I was going to use Duplicolor white primer. I was talking to my friend Sammy an expert autobody man who also is a modeler and he suggested Transtar 4633 white primer. I decided to give it a try and I`m impressed on how easy it is to sand. It feels like using dope and talcum powder as I was sanding with a 400 grit sandpaper it would powder and not clog my sanding pad.  I noticed that this primer is designed for priming plastics and metal Since I`m using SLC plastic covering in the wing I thought it would be a good for priming it.
                                                                                                                                                                             Juan

Title: Re: Transtar Autobody Technologies White Primer
Post by: RC Storick on August 04, 2016, 10:20:59 PM

I have never used anything like that but it should work. Good luck

Title: Re: Transtar Autobody Technologies White Primer
Post by: Juan Valentin on August 05, 2016, 12:07:13 AM

Hello Bob
                    Is working real good I just wanted to pass it on to others that this primer is available. It comes in White,black,grey and dark red.
                                                                                                                                                             Juan

Title: Re: Transtar Autobody Technologies White Primer
Post by: Perry Rose on August 05, 2016, 05:27:37 AM

Available on Amazon, about $12.00 per can.