stunthanger.com

General control line discussion => Open Forum => Topic started by: Mike Griffin on January 04, 2023, 04:40:59 PM

Title: Tongue Mufflers
Post by: Mike Griffin on January 04, 2023, 04:40:59 PM: I has been a while since I have needed a tongue muffler. Who can make them?

Thank you
Mike
Title: Re: Tongue Mufflers
Post by: Alan Buck on January 04, 2023, 04:48:55 PM: try Jim Lee at Lee Machine Shop
Title: Re: Tongue Mufflers
Post by: Craig Beswick on January 04, 2023, 04:59:31 PM: Brodak, Jim Lee, Stan Frady (On facebook).

All the best.
Craig
Title: Re: Tongue Mufflers
Post by: Robert Zambelli on January 04, 2023, 05:14:01 PM: Mike - which engine do you need the muffler for.?
Brodak has quite a large assortment.

Bob Z.
Title: Re: Tongue Mufflers
Post by: john e. holliday on January 04, 2023, 05:41:34 PM: Check out RSM Dist. D>K
Title: Re: Tongue Mufflers
Post by: Colin McRae on January 04, 2023, 05:59:02 PM: you can also try stanleyf770 on eBay
Title: Re: Tongue Mufflers
Post by: Dwayne Donnelly on January 04, 2023, 06:00:19 PM: Is Control Line Flying your page? ;)
https://www.facebook.com/groups/906304736107218/user/100028453434320
Title: Re: Tongue Mufflers
Post by: Mike Griffin on January 04, 2023, 06:20:09 PM: Quote from: Dwayne Donnelly on January 04, 2023, 06:00:19 PM
Is Control Line Flying your page? ;)
https://www.facebook.com/groups/906304736107218/user/100028453434320

Hi Dwayne,

I created the facebook "Control Line Flying" and "Control Line Classifieds" groups a few years ago and I do read it when I get the chance.

Mike
Title: Re: Tongue Mufflers
Post by: Mike Griffin on January 04, 2023, 06:22:20 PM: Quote from: Robert Zambelli on January 04, 2023, 05:14:01 PM
Mike - which engine do you need the muffler for.?
Brodak has quite a large assortment.

Bob Z.
Hi Bob. I will have to check all my engines but I just acquired a K & B 28 sportster that needs one and I will check the others I have that need one.

Mike
Title: Re: Tongue Mufflers
Post by: Dwayne Donnelly on January 05, 2023, 08:43:16 AM: Quote from: Mike Griffin on January 04, 2023, 06:20:09 PM
Hi Dwayne,

I created the facebook "Control Line Flying" and "Control Line Classifieds" groups a few years ago and I do read it when I get the chance.

Mike

The link I posted is for Stan Frady, he makes and sells tongue mufflers on your page and from what I hear they are very good. :)
Title: Re: Tongue Mufflers
Post by: M Spencer on January 05, 2023, 10:09:58 PM: If youve got a drill press & a vice ,

(https://i.ebayimg.com/images/g/utIAAOSw3qxjLm2m/s-l500.jpg)

(https://i.ebayimg.com/images/g/nxQAAOSw7NJgVymL/s-l640.png)

(https://www.horizonhobby.com/dw/image/v2/BFBR_PRD/on/demandware.static/-/Sites-horizon-master/default/dw5a6a286e/Images/DUB/DUB699_A0_IQTNP7SP.jpg?sw=800&sh=800&sm=fit)

(https://i.ebayimg.com/images/g/nnQAAOSwFAlitotF/s-l1600.jpg)

(http://www.supercoolprops.com/articles/articleimages/1902.jpg)

%^@ :-X looks like this guys got a bit carried away whittling . a RASP to eqi pen lines , dressed on sandpaper , a perfectionist might use finer than 80 weight . If youve got the time & a steady hand
and a good center punch . VD~

(https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcQGp8k9CzZ2kunHepOGKfKcDqDFeKFgE3CQ9975knHkqUlYsxg6LF11I0QPEDLxpTlebwQ&usqp=CAU)
Title: Re: Tongue Mufflers
Post by: M Spencer on January 05, 2023, 10:12:42 PM: (https://cdn11.bigcommerce.com/s-5wloa99oru/images/stencil/500x659/products/19455/49149/Exhaust3__94574.1581319269.PNG?c=2)

(https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcTta8oymJV0FZRfUhyVDN82KSjBQC9ciKCdKEwO07wbz29b_cgBfxq09oZs9f7Q3KjRUIc&usqp=CAU)