stunthanger.com

General control line discussion => Open Forum => Topic started by: Dick Byron on January 30, 2008, 05:45:32 PM

Title: Tom Morris control system
Post by: Dick Byron on January 30, 2008, 05:45:32 PM

got it.

Title: Re: Tom Morris control system
Post by: Dave Nyce on January 30, 2008, 05:57:46 PM

Tom Morris controls are also sold by North Coast Hobby  (WWW.northcoasthobby.com).

Dave

Title: Re: Tom Morris control system
Post by: Dick Byron on January 30, 2008, 06:03:17 PM

Thanks Dave.

Title: Re: Tom Morris control system
Post by: Jim Snelson on January 30, 2008, 08:20:03 PM

I just got off the phone with Dick letting him know I had shipped his order yesterday and had not emailed him a bill yet.

I just thought I should clarify. I work a full job from 8am to 5:30pm mountain time. I am only in the hobby shop evenings and weekends so if you do not hear from me during the day please be patient I will get back to you as soon as I get to the shop and answer either your voice mail or email. Thanks for your patience.

Jim Snelson
www.clcentral.com

Title: Re: Tom Morris control system
Post by: Rudy Taube on January 30, 2008, 11:59:49 PM

Hi Dick,

FWIW, I have placed many orders with Jim at CL Central and I have always received outstanding service. He has been helpful with my selections and has always been fast with his replies, and his shipments. I could not ask for a better CL supplier. :-)

Jim also makes up custom Morris control systems for our CL planes. Everything from CF PRs to custom bent, fully bushed, Control Horns to complete "plug and play" control systems.

I think we are all very lucky to have nice guys like Jim who go the extra mile for us CL flyer's in providing quality products with top quality service! :-)

Regards,  H^^

Title: Re: Tom Morris control system
Post by: Dick Byron on January 31, 2008, 06:02:39 AM

Thanks Jim,
   I did not realise this was not your full time job. Thanks again for your understanding.

Dick

Title: Re: Tom Morris control system
Post by: john e. holliday on January 31, 2008, 04:03:27 PM

Way to go Richard,  you know the good book or someone said patience is a virtue.  We all live and learn, but, Jim is one terrific guy as well as his family.  Using his wing jig right now.  Later,  DOC Holliday

PS:I can pick on Richard as I have known him since he used to be in the KC area.  jeh

Title: Re: Tom Morris control system
Post by: Dick Byron on January 31, 2008, 06:08:19 PM

OK whisker breath. LL~ LL~ LL~ LL~ LL~

Title: Re: Tom Morris control system
Post by: Bill Little on February 01, 2008, 09:36:03 AM

Jim is a GREAT guy to deal with!