Evo 60

[Bootlegger]

 Guy's I am looking for some venturi "O" rings for the Evo 60 engine.

  They are fairly thin approx 1/16" thick, so any help/suggestions will be appreciated..

[Bill Hummel]

Hi, Gil, I get my small O rings from Jim Lee; he has 8 mm and 10 mm diameter ones that are really "thin", have
never found any around here as good as Jim's!

[Randy Cuberly]

Hi Gil,
McMaster-Carr is where I get O-Rings but thier website seems to be down right now...not sure why.

Grainger is another likely supplier.  Order o-ring by I.D. and cross section...you want ideally a few thousanths smaller than the venturi barrel that it fits on...they will in fact stretch about 10% with no deleterious effect!

Ace Hardware also sells small kits with an assortment of o-rings and you could probably find what you need in the kit but of course you then have about 50 other o-rings to find a home for...

Randy Cuberly

[Andrew Saunders]

Horizon Hobby will carry them for that engine also.

[john e. holliday]

Got my O rings for Jim's fuel injector at the local O'Reilly's auto parts.