Mark, was the foil hat protecting you from stray signals or was it concave so you could receive them?
That's an EXCELLENT question! It also seems a propitious moment to announce a very important new development in Aluminum Foil Deflector Beanie (
http://en.wikipedia.org/wiki/Tin_foil_hat ) technology. For years, conventionally-shaped (conformal) beanies have protected people from the deleterious effects of mind-control radiation devices. However, the high reflectivity that resulted in such excellent protection had the very unfortunate side effect that *the reflected mind-control rays were easily detected by the source*. This left the subject free of mind-control,
but also easily indentified and tracked, and thus subject to other forms of coercion/influence.
But now, for the first time ever, the Sekrit Kabal has authorized disclosure of a new development in AFDB technology - the
faceted deflector beanie! Created using principles of radar-based stealth first identified by Ufimtsev and developed by Denys Overholser at the Lockheed Skunk Works, the facets of the Faceted Aluminum Foil Deflector Beanie (FAFDB, or FAB, for short) reflect mind-control radiation as effectively as a conventional AFDB, but
do not deflect the rays back towards the source and are thus
immune to detection by the mind control operators. Even better, the FAB beanie can be faceted and function perfectly as a pyramidal shape -
and thus serve a secondary purpose of channeling the Earth's energy for the user's benefit, much like the original faceted shapes, the pyramids found on Egypt's Giza plateau!!!!!. Of course this effect is optimized only when the head is properly aligned with true North, but useful effects can be detected as far as 45 degrees from the ideal alignment.
Full diagrams and tolerances for construction of a FAB beanie are in the drawing release cycle as we speak, prototypes are in testing, but it appears that no special tooling or exotic materials are required, merely conventional household aluminum foil, careful attention to detail, and studious maintenance of the sharpness of the folds to prevent stray reflections in the direction of the emitter.
Details to follow!
Brett
p.s. A critical note for those anxious to develop their own version before the official plans can be released and distributed. It had been noted in development of the FAB that the proper shape and orientation is *critical*! Improper shape and/or inverted use can turn the advantages of the stealth version to a liability; specifically, creating a FAB with 3 faces and a 90-degree angle can create what physicists refer to as a
corner reflector! A corner reflector deflects the mind-control radiation, but unfortunately,
it reflects the radiation perfectly back to the source!. This effect has been used for other sinister applications for decades - the Sekrit Kabal developed corner reflectors carried to the moon on the Apollo program. Ostensibly used to measure the distance to the moon with great accuracy (see below) but with a covert side effect of permitting very narrow-beam point-point communication via moon-bounce transmission. These were tested on the PAMPA Project Mogul balloons as radar targets that were, unfortunately, compromised with infamous consequences ( see also below, bottom picture modified to conceal identity of developer). In any case, improper shaped FABs can both greatly magnify the reflected radiation, but also concentrate the radiation intensity for the user, obviating the advantages. All the attacker need do is set up the transmitter on the antipode, and aim the beam downwards and into the cavity! The Earth is almost completely transparent to mind-control radiation frequencies, so control and tracking are enhanced! The average user does not possess the technology to adequately test for this effect. Please take extreme care in constructing unapproved FAB designs.