Hi John
I haven't discovered yet how to obtain SLC film in the UK. Currently I plan to use the same mylar film that the combat guys use. I have used it before but currently I am struggling to find a suitable adhesive. When I last used it successfully I used Evostick thinned with Evostick solvent but neither of those are available now in the form that I used them before as the PC brigade has forced a reformulation. I am open to any suggestions for the adhesive
Hi Mike
"Pattex clear" contact glue was often recommended for mylar in other Combat Forums.
You should find such in Hardware stores like "Bauhaus" or "Hornbach" ,not sure if there is any in the UK ?.
Just apply a thin film at the LE frontend hardwoodspar ,top of all rips ,wingtips and the backface of trailing edge.
After letting dry for a couple minutes , iron on the mylar.
This has been working for others so it should work for you.
If you can not find "Pattex clear" send me pm.
Mejzlik CZ is also a good source for it.
Peter