stunthanger.com
General control line discussion => Open Forum => Topic started by: Lynn Weedman on September 14, 2011, 06:15:30 PM
-
We just finished up the lettering & numbering on the strega. NO DECALS !!!! Gave the airbrush a little business, its all paint !!! y1
Hope to have it up in the air next week.
-
st 60
-
st 60
You need a PA75 <=
-
ST 60 and the Strega is a good combination ..Keep us informed on progress, Red white and Black, always a good combination
I really like the fishbones on the wing paint lines .. Hope to see you at Huntersville next month
Will
-
Looks great!!!
I would put a bigger motor in the Strega, or something with more power. I found that the ST 60 started to run out of steam at the team trials pulling a 700 sq in airplane (struggling on 120 degree turns). This is a larger airplane and a MUCH thicker wing.
-
In a nut shell, its a beautiful piece of art. Nice job I wish I had the artist talent that you do.
-
we'll be there for sure william i can't wait! and matt yea im in the process of getting a P.A. 75 for it i tihnk that'll have enough guts to pull that thick airfoil haha
-
Way cool. Wish I knew how to air brush.
I get a brush and wave it around in the air. Not the same effect.
-
You need a PA75 <=
check your messages steven
-
Looks great!!!
I would put a bigger motor in the Strega, or something with more power. I found that the ST 60 started to run out of steam at the team trials pulling a 700 sq in airplane (struggling on 120 degree turns). This is a larger airplane and a MUCH thicker wing.
No worries, nothing that 30% nitro can't fix...
-
Saito 72 CL.
-
No worries, nothing that 30% nitro can't fix...
haha yea steve we'll get it amped up...im getting one of randys majic props it should be here next week so we'll have it going around in circles for sure haha
-
More POWER AAAUUUUHHHGG !!!!! LL~
-
I like the looks of the plane, it looks great and a lot more than I do. Now as far as the guy in the T-shirt, I would much rather see a bikini clad female standing with the plane. LL~ LL~ LL~
-
I like the looks of the plane, it looks great and a lot more than I do. Now as far as the guy in the T-shirt, I would much rather see a bikini clad female standing with the plane. LL~ LL~ LL~
haha very funny mr. holliday haha
-
What color is the red? It looks hot! y1 Steve
-
What color is the red? It looks hot! y1 Steve
It's a sig tennessee red and my uncle made some mixing magic to make it sort of transparent and shiny haha
-T.J.
-
T.J., did you find a PA.75? H^^ Ron.
-
haha yea steve we'll get it amped up...im getting one of randys majic props it should be here next week so we'll have it going around in circles for sure haha
I've got a couple of Mejzlik three blades that outta work that we can try if you guys come up to Huntersville.
-
I've got a couple of Mejzlik three blades that outta work that we can try if you guys come up to Huntersville.
we'll be there steve and i appricite it we'll see how it does with randys prop first
-
T.J., did you find a PA.75? H^^ Ron.
hey ron one is being sent to me so yes im gettin a 75...thanks for your suggestions!
regards -T.J.
-
hey ron one is being sent to me so yes im gettin a 75...thanks for your suggestions!
regards -T.J.
Strega with a PA 75. Now that's a real mans combination. y1
-
Strega with a PA 75. Now that's a real mans combination. y1
the only problem is the 75 is rear exaust and the strega is side exaust....so we're gonna have to build an sv plane to fit the 75...idk yet we'll see...the stregas wing is a little too far down to do operations for a pipe but like i said we'll have to see what the deal is when i get it
-
the only problem is the 75 is rear exaust and the strega is side exaust....so we're gonna have to build an sv plane to fit the 75...idk yet we'll see...the stregas wing is a little too far down to do operations for a pipe but like i said we'll have to see what the deal is when i get it
You can get a header with a larger rise compared to the conventional 1 1/4 inch. Also, I'm not sure how well they would work on a PA 75, but windy used to make bent pipes. He's since stopped manufacturing pipes, but maybe you could give Kent tysor a call and see if he has any. I used one at the NATS with a RO-Jett 76 and it worked pretty well.
I do know Kent told me he was running Eather pipes on his Strega, so it sounds like you cold make it work
-
You can get a header with a larger rise compared to the conventional 1 1/4 inch. Also, I'm not sure how well they would work on a PA 75, but windy used to make bent pipes. He's since stopped manufacturing pipes, but maybe you could give Kent tysor a call and see if he has any. I used one at the NATS with a RO-Jett 76 and it worked pretty well.
I do know Kent told me he was running Eather pipes on his Strega, so it sounds like you cold make it work
i think allen brickhaus runs a set up like that on his P.A. 65 in his olympic....like i said i'll wait til it gets here and if theres a way to make it fit we'll make it work...if not then we're probably gonna build an S.V.-23
-
hey TJ the 75 fits were the st60 does run the 75 with a header muffler . till you build sv/23 than go with a pipe
-
hey TJ the 75 fits were the st60 does run the 75 with a header muffler . till you build sv/23 than go with a pipe
thanks allan i tihnk that's what we are going to try to do hope to see you at huntersville #^
-T.J.