stunthanger.com
General control line discussion => Open Forum => Topic started by: RandySmith on December 08, 2017, 05:36:59 PM
-
Hi All I have many people ask about large PA 61 or 65 side exhaust motors, so I am trying to find how many would be interested in buying these, they would be as the PA 75s were done , and would be prepaid
Regards
Randy
-
65's
tim
-
65 any possibility of a 65 re run in the future
Thanks Tom Weedman
-
PA 65 SE... No, PA 65 RE... YES,YES, YES...
Thanks;
Larry Fruits
-
PA 65 SE... No, PA 65 RE... YES,YES, YES...
Thanks;
Larry Fruits
What Larry said
-
61 or 65 SE, one for sure. Maybe 2
-
65 any possibility of a 65 re run in the future
Thanks Tom Weedman
Hi Tom Yes there is, however when those are offered, it will most likley be based on the 75 Merlin case, and can be a 65 to 69
I would need to get at least 50 orders for those
Right now with us having 100s and 100s of big 60 size ARFs and ARCs in stock, and me also expanding my LASER cut SV kit line, I have had many people ask about side ex PA engines in 61 or 65, Most likely if the run is done it will be 65s
Regards
Randy
-
Hi Tom Yes there is, however when those are offered, it will most likley be based on the 75 Merlin case, and can be a 65 to 69
I would need to get at least 50 orders for those
Right now with us having 100s and 100s of big 60 size ARFs and ARCs in stock, and me also expanding my LASER cut SV kit line, I have had many people ask about side ex PA engines in 61 or 65, Most likely if the run is done it will be 65s
Regards
Randy
So if you did a new run of 65 side exh. would they be Merlin case ?
-
So if you did a new run of 65 side exh. would they be Merlin case ?
Hi Allan
NO there is no such thing as a side exhaust Merlin, all the Merlin engines are rear ex. such as the PA 40 Ultra ite and PA 75
Regards
Randy
-
PA 65 RE, Please!
-
Not that I need another freaking engine...(I have two cabinets full now) but I think the PA65 RE and a rear exhaust type of muffler on the order of the Stalker engines would be the best idea. These could be used in any kind of installation and personally (and I don't think I'm the only one) I believe the PA65RE to be the best running and simplest turnkey stunt engine ever produced by anyone...Rear or side exhaust! I just can't imagine not using those if they were available!
Randy, you know better than anyone that the 65 is probably the most successful stunt engine since the Game began!
The reason is that they are easy to use, either on a pipe or rear exhaust muffler, and don't need to be fed 7.5 oz. of fuel to be competitive with anything. All that and the installation is cleaner with less weight forward.
That's my considered opinion, and it makes most sense! y1 y1 y1
Obviously, I would be interested in a PA65RE...Oh yeah and a light rear exhaust muffler like the stalker! In fact Stalker even makes one that bolts right on to the Merlin case! #^ #^ #^
Randy Cuberly
-
Randy, I would like one PA65SE and one PA65RE. Mike Stinson.
-
Correct me if I'm wrong but, I think you guys are gonna get side exhaust or rear exhaust because, the part of the run that gets farmed out is the casting.
When I think side exhaust I think of a profile fuselage or upright engine but I don't think that's practical for this size. With an inverted engine you're looking at the muffler in flight, it's drag and weight inboard and farther forward. Don't you have to take the muffler on and off to get the cowl off IDK. I think you get more oil on the plane with side exhaust. With rear exhaust you have the muffler/pipe option and did someone say it's lighter with the Merlin case? Seems like the rear exhaust is a no brainer. Can you drop a 75 sleeve in the 65RE? What's the thinking on a big side exhaust engine, do the ARF's have a pipe tunnel or room for a rear muffler?
MM
Yes you are wrong, side or rear has nothing to do with having a foundry cast cases, They will cast whatever I pay for, and the run will be most likely either side or rear exhaust, with the possibility of doing a main run of rear exhaust and having then add some side exhaust to it, but not the other way around.
On the 75 P/S no it will not fit into the older case , either side or rear
The 75 Merlin case is not lighter than the 65 case, but it is a designed for CL stunt case, and is a better case, even though they both are excellent.
Regards
Randy
-
Hi All I have many people ask about large PA 65 side exhaust motors, so I am trying to find how many would be interested in buying these, they would be as the PA 75s were done , and would be prepaid
Regards
Randy
-
Well that's good, guys can get whichever exhaust they want.
MM
We will, I need to find out what people want, and the demand for the PAs first before the decision is made on what to run, or to run them at all
Randy
-
Late to the party here but I'd prefer a 61SE (but a 65 would not be a deal breaker). 8)
-
I vote for a .65 side exhaust
-
65RE here, one for sure
-
I would like one PA-65 SE
-
Please put me down for 65 Rear Exhaust.
Let us/me know when to pre-pay.
Chris
Crowley TX
-
Rear PA 65 is my pick.