News:


  • July 22, 2025, 12:22:01 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Stanislav Cech's 'UNO' F2b Stunter  (Read 1828 times)

Offline Kevin Wright

  • Trade Count: (0)
  • Ensign
  • **
  • Posts: 42
Stanislav Cech's 'UNO' F2b Stunter
« on: July 14, 2011, 09:15:32 PM »
Hi,
Does anyone know where I could get a plan of Stanislav Cech's 'UNO'?

I have a set of drawings downloaded from zbocircular.com and apuca.com and am using them as a basis for a CAD set I'm drawing up.

I would however like a set of original plans if they are available.

Any help greatly appreciated.
Rgds,
Kevin Wright
Logged

Offline Wynn Robins

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1684
Re: Stanislav Cech's 'UNO' F2b Stunter
« Reply #1 on: July 14, 2011, 10:38:18 PM »
not sure if you'll find plans - I have the templates and dimensioned drawings from a magazine is that what you have also?
Logged
In the battle of airplane versus ground, the ground is yet to lose

Offline Douglas Ames

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1299
Re: Stanislav Cech's 'UNO' F2b Stunter
« Reply #2 on: July 14, 2011, 11:05:00 PM »
Am I seeing things or is only the forward leadout adjustable?
Looks like the aft leadout is the round hole near the TE...
Logged
AMA 656546

If you do a little bit every day it will get done, or you can do it tomorrow.

Offline Kevin Wright

  • Trade Count: (0)
  • Ensign
  • **
  • Posts: 42
Re: Stanislav Cech's 'UNO' F2b Stunter
« Reply #3 on: July 14, 2011, 11:32:40 PM »
Wynn,
Yes, I have a downloaded copy of the 'Model Konstructor' magazine article (all in Russian!) plus a more detailed
drawing from apuco.com.

I have sufficient to complete a set of CAD plans however some of the details in the drawings I have are indistinct - particularly engine mount and tank installation.
Rgds
Logged

Offline Russell Bond

  • Bandolero
  • AMA Member
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 450
Re: Stanislav Cech's 'UNO' F2b Stunter
« Reply #4 on: July 15, 2011, 01:53:52 AM »
On the photo I can see the two leadouts close together.

Could that "hole" be for inboard tip weight?  :o
Logged
Bandolero

Offline M Spencer

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 5259
Re: Stanislav Cech's 'UNO' F2b Stunter
« Reply #5 on: July 15, 2011, 02:46:14 AM »
One east european plane ( drg) recond it was super light and they ran 3 Oz in ea tip for stability / even load distribution .  n~
Logged

Offline Randy Cuberly

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 3673
Re: Stanislav Cech's 'UNO' F2b Stunter
« Reply #6 on: July 15, 2011, 10:37:45 AM »
Quote from: Matt Spencer on July 15, 2011, 02:46:14 AM
One east european plane ( drg) recond it was super light and they ran 3 Oz in ea tip for stability / even load distribution .  n~

Hmmmm...
Could be testing the "barbell theory" for stability.  Could work...to a point!

Randy Cuberly
Logged
Randy Cuberly
Tucson, AZ

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags: