stunthanger.com

General control line discussion => Open Forum => Topic started by: Dennis Nunes on July 30, 2017, 08:13:26 PM

Title: ST v60 with no Muffler Lugs - Need Tongue Muffler with Mounting Strap
Post by: Dennis Nunes on July 30, 2017, 08:13:26 PM

I have a ST v60 with no muffler lugs. Does anyone make a tongue muffler with a mounting strap?

Thanks,
Dennis

Title: Re: ST v60 with no Muffler Lugs - Need Tongue Muffler with Mounting Strap
Post by: RandySmith on July 31, 2017, 02:53:49 PM

Hi Dennis
I sell the one that bolts on. here is how people use it, I send with 4-40 x 1/4  aand people buy a small worm drive stainless radiator hose clamp, you open it up and bolt both ends to either side. Or some make a steel   "U"   that the bend to a L at the  ends and  bolt on, other  drill 1 hole in the center of the  tongue muffler, and bolt to the   R/C  butterfly web in the exhaust center//I do not recommend that... although I may have an Adamisin  tube setup like that

Randy Smith

Title: Re: ST v60 with no Muffler Lugs - Need Tongue Muffler with Mounting Strap
Post by: M Spencer on July 31, 2017, 11:30:22 PM

Quote

although I may have an Adamisin  tube setup like that

I'll Take It !  gimme a p.m. if you find one, or two . . . .