stunthanger.com

General control line discussion => Open Forum => Topic started by: bob whitney on November 23, 2015, 02:20:27 PM

Title: S/T rings
Post by: bob whitney on November 23, 2015, 02:20:27 PM

 we need to keep the old Tigres running

  i have just gotten into making rings because i needed some for my 60,  i have fixtures for S/T 60 rings .i have a Sunnen hone and can hone cylinders to fit the rings , i need some S/T 46 rings ,so will be making the fixtures for these . and would also do fixtures for the 51 if there is enough intrest could possably do some rod rebushing        Rad Racer

Title: Re: S/T rings
Post by: Randy Cuberly on November 23, 2015, 03:34:48 PM

Quote from: bob whitney on November 23, 2015, 02:20:27 PM

we need to keep the old Tigres running

  i have just gotten into making rings because i needed some for my 60,  i have fixtures for S/T 60 rings .i have a Sunnen hone and can hone cylinders to fit the rings , i need some S/T 46 rings ,so will be making the fixtures for these . and would also do fixtures for the 51 if there is enough intrest could possably do some rod rebushing        Rad Racer

Hi Bob I would be interested in two sets for ST46!

Randy Cuberly

Title: Re: S/T rings
Post by: Motorman on November 23, 2015, 04:35:23 PM

Price?

MM

Title: Re: S/T rings
Post by: Russell Shaffer on November 25, 2015, 11:29:17 AM

Bob, would you mind telling where you get the ring material?  Thanks.

Title: Re: S/T rings
Post by: bob whitney on November 25, 2015, 07:08:10 PM

  Russell the bar that i have was given to me ,i have enough left to make about 50 rings

i was told that MSC sells fine grain cast iron

Russell send me an email f2cracer at aol.com