stunthanger.com

General control line discussion => Open Forum => Topic started by: Bob Zambelli on October 23, 2007, 09:48:28 AM

Title: Spray bar diameter
Post by: Bob Zambelli on October 23, 2007, 09:48:28 AM

I am setting up a program to calculate the exact venturi area of a standard (through-hole) spray bar, and I need the diameter.

As I recall, it was around .157 but I'm not positive.

Any numbers???????????????

THANKS!!!
                      Bob Z.

Title: Re: Spray bar diameter
Post by: Clancy Arnold on October 23, 2007, 10:15:12 AM

Bob
I just used the digital calipers that Bill Gruby gave me and checked some that I have.
Fox 35 spraybar - .125 diameter
OS spraybar - .156 diameter
An old universal replacement spraybar - .120 diameter

Hope this helps,
Clancy

Title: Re: Spray bar diameter
Post by: RandySmith on October 23, 2007, 01:09:53 PM

Quote from: Bob Zambelli on October 23, 2007, 09:48:28 AM

I am setting up a program to calculate the exact venturi area of a standard (through-hole) spray bar, and I need the diameter.

As I recall, it was around .157 but I'm not positive.

Any numbers???????????????

THANKS!!!
                      Bob Z.

HI Bob


Super Tigre older ones  .157
Super Tiger  new ones  .156
Old OS Max  .157 ( FSR  and  35S  types)
New  OS  NVA   .137
PA type   .156
Fox 35  .127

Regards
Randy

Title: Re: Spray bar diameter
Post by: Mark Scarborough on October 23, 2007, 01:22:57 PM

Bob, this may help, here is a lik to an article written by Dave Gardner based on some Pat Johnston information
http://www.flyinglines.org/dg.venturi.html