stunthanger.com

General control line discussion => Open Forum => Topic started by: Phil Goldberg on March 05, 2016, 04:45:06 PM

Title: Spinner for 1/2a
Post by: Phil Goldberg on March 05, 2016, 04:45:06 PM

I have built the Space Kaydet Jr.  and am using a Norvel Big Mac .061.  I need a little more nose weight and am wondering if anyone can recommend a spinner that will work with this engine and a 6 X 3 prop.   I would prefer aluminum but will settle for plastic if need be.   Thanks

Title: Re: Spinner for 1/2a
Post by: dennis lipsett on March 05, 2016, 05:21:10 PM

Quote from: Phil Goldberg on March 05, 2016, 04:45:06 PM

I have built the Space Kaydet Jr.  and am using a Norvel Big Mac .061.  I need a little more nose weight and am wondering if anyone can recommend a spinner that will work with this engine and a 6 X 3 prop.   I would prefer aluminum but will settle for plastic if need be.   Thanks

Jim Lee sells a really nice looking aluminum spinner for about $20.00.It is worth it too.

Dennis

Title: Re: Spinner for 1/2a
Post by: Mike Mulligan on March 07, 2016, 06:42:24 PM

Brodak has very nice aluminum needle nose profile spinners starting at 1" diameter. I have a few and they are beautiful.

Title: Re: Spinner for 1/2a
Post by: Mike Keville on March 07, 2016, 07:39:29 PM

Lee Machine Shop:  jlee9 (at) cox (dot) net

Title: Re: Spinner for 1/2a
Post by: Phil Goldberg on March 07, 2016, 10:19:52 PM

Thanks for the help.  I will be ordering from Lee's

Title: Re: Spinner for 1/2a
Post by: john e. holliday on March 08, 2016, 10:12:02 AM

Remember Jim may be getting ready for VSC at Tuscon. 

Title: Re: Spinner for 1/2a
Post by: James Lee on March 08, 2016, 03:26:55 PM

Caught me just in time...
Spinner is on its way west as we speak....
And Lee Machine Shop will follow tomorrow!!    #^ #^ #^ #^ #^ #^ LL~ H^^
Jim

Title: Re: Spinner for 1/2a
Post by: bob whitney on March 08, 2016, 06:22:13 PM

  give them hell for me JIM