stunthanger.com

General control line discussion => Open Forum => Topic started by: George Albo on August 21, 2016, 11:03:16 AM

Title: Sizzix Cutter, cutting 1/16 balsa
Post by: George Albo on August 21, 2016, 11:03:16 AM

Here is the Sizzix Cutter, cutting 1/16 balsa. This might be of interest to some. The cutter can be programmed via your PC. No modules involved.
https://www.youtube.com/watch?v=QRvv4myOlFI&feature=youtu.be

George Albo

Title: Re: Sizzix Cutter, cutting 1/16 balsa
Post by: Motorman on August 21, 2016, 12:46:09 PM

I want that!

https://www.amazon.com/Sizzix-eclips2-Starter-Kit-Version/dp/B00IXFMH2S


MM

Title: Re: Sizzix Cutter, cutting 1/16 balsa
Post by: George Albo on August 21, 2016, 03:15:32 PM

Quote from: Motorman on August 21, 2016, 12:46:09 PM

I want that!

https://www.amazon.com/Sizzix-eclips2-Starter-Kit-Version/dp/B00IXFMH2S


MM

That puppy is on my must have list!  It uses a high speed cutter similar in function to a dremel or router. Any corners need to be filed square (big deal small inconvenience).


Check this out: http://www.hippocketaeronautics.com/hpa_forum/index.php?topic=19248.0