stunthanger.com

General control line discussion => Open Forum => Topic started by: Motorman on October 22, 2021, 08:19:06 AM

Title: blank
Post by: Motorman on October 22, 2021, 08:19:06 AM

blank

Title: Re: Shark 402
Post by: Joe Ed Pederson on October 22, 2021, 02:19:02 PM

Measurements are from the plans for the Brodak Shark 402 kit.

1 3/4 inches thickness at the spar.
Chord without the tapered sheet trailing edge: 9 inches
Chord at fuselage including the tapered sheet trailing edge: 10 5/16 inches.

Hope this helps.

Joe Ed Pederson

Title: Re: Shark 402
Post by: Geoff Goodworth on October 24, 2021, 11:49:35 PM

From Pat's drawing —

CG 1.90" behind LE with a range of 0.5897" behind that.