stunthanger.com

General control line discussion => Open Forum => Topic started by: Crist Rigotti on February 15, 2025, 08:20:22 PM

Title: SAE Hex Drivers
Post by: Crist Rigotti on February 15, 2025, 08:20:22 PM: Guys,
I'm looking for a decent set of SAE hex drivers preferably each size has a different color handle. I'm looking for a set that each size as its own handle. I don't want Dubro or Bondus. I have some metric ones with an aluminum handle that was gifted to me but don't know where they came from. Any ideas where to get a good set?
Title: Re: SAE Hex Drivers
Post by: Brett Buck on February 15, 2025, 08:23:10 PM: Quote from: Crist Rigotti on February 15, 2025, 08:20:22 PM
Guys,
I'm looking for a decent set of SAE hex drivers preferably each size has a different color handle. I'm looking for a set that each size as its own handle. I don't want Dubro or Bondus. I have some metric ones with an aluminum handle that was gifted to me but don't know where they came from. Any ideas where to get a good set?

I have these, they are about what you would expect from Craftsman, good enough.

https://www.bing.com/shop/productpage?q=CRAFTSMAN+CRAFTSMAN+7PC+SAE+NUT+DRIVER+SET+(CMHT65122)&productpage=true&pdppageoverlay=true&bgscenario=l2&originQuery=craftsman+nut+driver+set&overlayOfferIds=169852657010%2c179854060877%2c214927292745%2c170561025615%2c163097592710%2c163536886173%2c225697653429%2c93882898817&overlayId=163097592710&filters=PageType%3a%229%22+scenario%3a%2217%22+gType%3a%2212%22+gId%3a%22163097592710%22+gGlobalOfferIds%3a%22163097592710%22&FORM=SHOPIC

Brett
Title: Re: SAE Hex Drivers
Post by: Alan Buck on February 15, 2025, 09:05:20 PM: Lee Machine Shop Jim Lee in the venders corner
Title: Re: SAE Hex Drivers
Post by: Crist Rigotti on February 15, 2025, 10:13:40 PM: Quote from: Alan Buck on February 15, 2025, 09:05:20 PM
Lee Machine Shop Jim Lee in the venders corner

Of course! Duh.
Title: Re: SAE Hex Drivers
Post by: Reptoid on February 16, 2025, 01:02:43 AM: https://www.amainhobbies.com/search?s=hex%20driver%20sets&fk=32_3513|31_1090&lg=fk32
Title: Re: SAE Hex Drivers
Post by: Steve Berry on February 16, 2025, 09:32:22 AM: There is this. It may be exactly what you're looking for. With a little persuasion, you may be able to get Sparky to add it to his Amazon store and then order it, thus helping him out a little while still getting exactly what you need.

https://www.amazon.com/toolant-Wrenches-Patented-Magnetizing-Demagnetizing/dp/B0CP8TPSDZ/ref=sxin_16_pa_sp_search_thematic_sspa?cv_ct_cx=sae%2Bhex%2Bkey%2Bset&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sr=1-4-6024b2a3-78e4-4fed-8fed-e1613be3bcce-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM (https://www.amazon.com/toolant-Wrenches-Patented-Magnetizing-Demagnetizing/dp/B0CP8TPSDZ/ref=sxin_16_pa_sp_search_thematic_sspa?cv_ct_cx=sae%2Bhex%2Bkey%2Bset&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sr=1-4-6024b2a3-78e4-4fed-8fed-e1613be3bcce-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM)

Steve
Title: Re: SAE Hex Drivers
Post by: John Rist on February 16, 2025, 12:29:04 PM: McMaster-Carr Has all kinds. Search under hand tools.

https://www.mcmaster.com/
Title: Re: SAE Hex Drivers
Post by: Paul Smith on February 16, 2025, 01:09:28 PM: Those color-coded Craftsmen are what I use. I only have the #4 & #6 sizes. All I want for modeling. Maybe with Sears gone, Craftsmen might be gone too.
Title: Re: SAE Hex Drivers
Post by: BillLee on February 16, 2025, 01:22:18 PM: Support a fellow modeler: buy from Jim Lee.

LeeMachineShop.com

(Disclaimer: no relation.)
Title: Re: SAE Hex Drivers
Post by: Steve Helmick on February 16, 2025, 02:29:53 PM: Acme. Duh! Good enough for Wiley. LL~ Steve

https://www.acmetools.com/all/?q=t+handle+hex+wrench