stunthanger.com

General control line discussion => Open Forum => Topic started by: James Mills on April 28, 2018, 01:17:54 PM

Title: RSM Profile P-40
Post by: James Mills on April 28, 2018, 01:17:54 PM

Have a kit for the electric version and would like to hear opinions of anyone who has built and flown this one.  Any changes you would make if you built another and so on.

Thanks,

James

Title: Re: RSM Profile P-40
Post by: Joseph Daly on April 28, 2018, 04:36:20 PM

James,
Joe has one. It flew pretty good. It weight 50 oz. it was powered by a scorpion 3020 with a icelite 50 with a hubin timer on 4s 2700mah batteries. It was built just as the plans show. The only thing I would be worry about the stab being to flexible. We put carbon rods in to stiffen after it was built. We still have it in the basement, had to be repaired after a figure 9! He just needs to recover it.

Joe

Title: Re: RSM Profile P-40
Post by: Mike Griffin on April 28, 2018, 06:45:09 PM

James, the picture of the red one that Eric uses on the RSM website is mine.  I built and flew the prototype of the model when he first came out with it.  It is a very good flying model. 

Mike