stunthanger.com
General control line discussion => Open Forum => Topic started by: Randy Cuberly on August 12, 2018, 11:48:43 PM
-
Hey Brett...I sent you a PM many days ago. Did you get it? I have some questions about the "Infinity" I'm building.
Thanks for your attention.
Randy Cuberly
-
Hey Brett...I sent you a PM many days ago. Did you get it? I have some questions about the "Infinity" I'm building.
Thanks for your attention.
There was (no subject) in your mail title. I will respond later this evening.
I am perfectly OK with people building the airplane, but those plan were never released or published, and were never complete. A far as I know, I only ever gave them to one person, so I am not sure where they are coming from. There are a couple of things Jack and I never got quite right and I can just see what will happen when someone "modifies" it and then finds it doesn't fly properly - or builds it and finds that a 40VF won't fit.
Brett
-
There was (no subject) in your mail title. I will respond later this evening.
I am perfectly OK with people building the airplane, but those plan were never released or published, and were never complete. A far as I know, I only ever gave them to one person, so I am not sure where they are coming from. There are a couple of things Jack and I never got quite right and I can just see what will happen when someone "modifies" it and then finds it doesn't fly properly - or builds it and finds that a 40VF won't fit.
Brett
Hi Brett,
Yes I know. We had a conversation about this over a couple of years ago in Tucson. I really don't want to make any modifications to any of the aerodynamics or appearance. I do want to use a different power plant. A Stalker 66 that actually weighs about the same as the RO Jett 61 you use but doesn't use a Pipe.
I found a deal on a Bob Hunt wing, Stab and elevator for the Infinity and simply want to pick your brain about control ratios etc.
I'm a very experienced builder and will literally build the Fuselage around the Stalker Engine. If you would rather discuss this on the telephone I would be up for that and I'll send you my phone number in a PM.
Randy Cuberly