News:


  • March 28, 2024, 03:39:40 PM

Login with username, password and session length

Author Topic: Push rod ends and Carbon Fiber Pushrods  (Read 655 times)

Offline Mike Griffin

  • 2018 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2754
Push rod ends and Carbon Fiber Pushrods
« on: February 04, 2023, 05:09:23 PM »
I would appreciate some help for sources on threaded push rod ends for carbon fiber tubes (either the ones that go inside the rod/tube) or the ones that go over the tube and capture it.  Also what size CF tubes do I order for the corresponding threaded push rod ends to make sure the threaded end will go over the OD of the tube.  Tom Morris used to sell the ends and rods but cannot remember the sizes I ordered.

Hope this is not confusing. 

Mike

Offline Paul Walker

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1626
Re: Push rod ends and Carbon Fiber Pushrods
« Reply #1 on: February 04, 2023, 05:32:23 PM »
Central hobbies has them all!

Offline Mike Griffin

  • 2018 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2754
Re: Push rod ends and Carbon Fiber Pushrods
« Reply #2 on: February 04, 2023, 05:51:31 PM »
Central hobbies has them all!

Thank you Paul.

Mike

Offline Bill Morell

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 953
Re: Push rod ends and Carbon Fiber Pushrods
« Reply #3 on: February 04, 2023, 08:58:29 PM »
Mike, you did a video a few years ago of the ends that went over the carbon fiber rods. They were sold by RSM.
Bill Morell
It wasn't that you could and others couldn't, its that you did and others didn't.
Vietnam 72-73
  Better to have it and not need it than it is to need it and not have it.

Offline Mike Griffin

  • 2018 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2754
Re: Push rod ends and Carbon Fiber Pushrods
« Reply #4 on: February 04, 2023, 10:13:54 PM »
Mike, you did a video a few years ago of the ends that went over the carbon fiber rods. They were sold by RSM.

I remember that very well because Eric asked me to do the video and he had it posted on his web site .  However when he sold the business 5 years ago, things changed.  Not an option anymore.  I ordered some on Paul's recommendation. 

Mike

Offline Bill Morell

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 953
Re: Push rod ends and Carbon Fiber Pushrods
« Reply #5 on: February 05, 2023, 07:00:25 AM »
I remember that very well because Eric asked me to do the video and he had it posted on his web site .  However when he sold the business 5 years ago, things changed.  Not an option anymore.  I ordered some on Paul's recommendation. 

Mike



As far as I know he still sells them.
Bill Morell
It wasn't that you could and others couldn't, its that you did and others didn't.
Vietnam 72-73
  Better to have it and not need it than it is to need it and not have it.


Advertise Here
Tags:
 


Advertise Here