Author Topic: Post one build photo here (this months giveaway) (Read 6426 times)

RC Storick · « **on:** April 19, 2013, 11:40:34 AM »

Post one build photo here and a brief description of the project for a chance for this months giveaway at a glue caddy from Mercury. I will take the names of the total entry and draw one. Good luck!

Entry's close Wendsday the 24 Photo's must be of construction not finished aircraft.

Tim Wescott · « **Reply #1 on:** April 19, 2013, 11:47:31 AM »

Ohhh kay. How about a full-fuse model for a change?

Squarecoupe. Original design indoor Bostonian. 10g (can I never build a plane down to a weight?). I got too involved in CLPA to finish trimming it, but it showed much promise.

Randy Ryan · « **Reply #2 on:** April 19, 2013, 11:54:04 AM »

Quote from: Tim Wescott on April 19, 2013, 11:47:31 AM

Ohhh kay. How about a full-fuse model for a change?

Squarecoupe. Original design indoor Bostonian. 10g (can I never build a plane down to a weight?). I got too involved in CLPA to finish trimming it, but it showed much promise.

Dang Tim, I'd like to see a finished shot of that!!

Duke.Johnson · « **Reply #3 on:** April 19, 2013, 12:14:56 PM »

My first try at Indoor Free Flight. P-51 that will be covered with tissue ran through the printer.

Yes I know the wing is on the wrong side of the plane. I didn't take the picture.

Mike Griffin · « **Reply #4 on:** April 19, 2013, 12:38:27 PM »

Building the YAK 9 Fuselage

Mark Scarborough · « **Reply #5 on:** April 19, 2013, 12:53:57 PM »

My conversion, bf109 converted to use electric power,,

Howard Rush · « **Reply #6 on:** April 19, 2013, 01:20:01 PM »

Igor's Logarithmic Device installation in electric Impact:

Eric Viglione · « **Reply #7 on:** April 19, 2013, 01:48:50 PM »

Here's a shot of my new Katana (in painting stage now...) fuse sides with stringers installed, former and crutch placement all marked, and you may note a filler piece to elongate the pipe tunnel the the PA75...

EricV

Bob Hudak · « **Reply #8 on:** April 19, 2013, 01:50:18 PM »

Electric F105 Thunderchief build for 2013 flying season.

Randy Powell · « **Reply #9 on:** April 19, 2013, 02:00:12 PM »

Since I won last month (Thanks Robert!), I'll forgo a picture. Go get 'em, guys.

FLOYD CARTER · « **Reply #10 on:** April 19, 2013, 02:46:00 PM »

Some parts for a fitzgerald "ThunderGazer"

Allen Brickhaus · « **Reply #11 on:** April 19, 2013, 02:49:35 PM »

Newest Barnstormer, possible 30 ounce model when done. L&J Fox 35 for power.

EddyR · « **Reply #12 on:** April 19, 2013, 02:55:02 PM »

Putting my Reactor back together. There were many pieces before today. Last flight about 7-8 years ago.
Ed

BYU · « **Reply #13 on:** April 19, 2013, 03:52:22 PM »

Build of Aerostar wing. Flapless profile design based on the 1978 Wonder wings design.

BYU · « **Reply #14 on:** April 19, 2013, 03:59:20 PM »

Components for the Aerostar ready to assemble

John Hammonds · « **Reply #15 on:** April 19, 2013, 04:12:59 PM »

Wunderbird, 70's design from Ron Parsons in the UK. 56" 646sq". Finished model powered by E-Max 2820 920kv, wgt 54oz

TTFN
John.

Steve Fitton · « **Reply #16 on:** April 19, 2013, 04:21:48 PM »

From a few weeks ago, test fitting pilot figure into cockpit of my new Dreadnought

Balsa Butcher · « **Reply #17 on:** April 19, 2013, 04:32:57 PM »

Legacy Sport - AKA .46 sized Olympian. LA-46 for power. Getting close.

ptg · « **Reply #18 on:** April 19, 2013, 04:46:10 PM »

Alignment

Avaiojet · « **Reply #19 on:** April 19, 2013, 05:13:47 PM »

Twin boom project that I will eventually get around to.

Jim Hoffman · « **Reply #20 on:** April 19, 2013, 06:13:20 PM »

stab - elev of a new Super 70s. Joe Reinhard's Snoopy
Built w/ my own foam cores,
1/16 balsa skin on Stab
1/32 balsa skin on Elevators

Jim Hoffman

Balsa Butcher · « **Reply #21 on:** April 19, 2013, 07:14:28 PM »

Phil -that's three photos (The devil made me post this)

Randy Ryan · « **Reply #22 on:** April 19, 2013, 08:11:54 PM »

Cheater Green Box Nobler (foam wing)

Randy Powell · « **Reply #23 on:** April 19, 2013, 08:23:21 PM »

Wow, Phil, your shop is so clean.

MarcusCordeiro · « **Reply #24 on:** April 19, 2013, 08:25:07 PM »

My Thundergazer...

Marcus

Dave_Trible · « **Reply #25 on:** April 19, 2013, 08:43:57 PM »

Desperado #5 travel version (Drifter?). Max lift wing version, RO Jett .61/.76.

Dave

wwwarbird · « **Reply #26 on:** April 19, 2013, 10:24:00 PM »

I'll be back on this project soon...I think, maybe.

Rick Bollinger · « **Reply #27 on:** April 19, 2013, 10:26:55 PM »

Cutting out 3-1/2a Skyrays for our clubs 1st annual take a kid flying day. When I'm done with these I'll do 3 Ringmasters. I hope we have some kids serious enough to give them to.

Jason Greer · « **Reply #28 on:** April 19, 2013, 11:57:46 PM »

Electric powered Impact wing halves ready to join along with a nearly finished Korda.

Paul Allen · « **Reply #29 on:** April 20, 2013, 04:43:15 AM »

Wing fillet on K Factor, OS 25 VF on pipe.
Paul
In OZ

MikeCoulombe · « **Reply #30 on:** April 20, 2013, 06:03:17 AM »

Long term build Trivial Pursuit, have not started the fuse yet.

Claudio Chacon · « **Reply #31 on:** April 20, 2013, 07:08:27 AM »

The "77's". Building wing #1.

Randy Ryan · « **Reply #32 on:** April 20, 2013, 07:14:13 AM »

Quote from: paul allen on April 20, 2013, 04:43:15 AM

Wing fillet on K Factor, OS 25 VF on pipe.
Paul
In OZ

Nice fillet job, I love to see builds like this!

John Stiles · « **Reply #33 on:** April 20, 2013, 11:10:11 AM »

Ringmaster Imperial started:

William DeMauro · « **Reply #34 on:** April 20, 2013, 08:13:29 PM »

First public photo of Voltron by me.

Doug Moon · « **Reply #35 on:** April 20, 2013, 11:53:03 PM »

My current Riff Raff project on the board.

John Cralley · « **Reply #36 on:** April 21, 2013, 07:03:30 AM »

Ringmaster 526 (sq inches) wing on my jig.

Crist Rigotti · « **Reply #37 on:** April 21, 2013, 07:06:14 AM »

Here's a photo of the wing of my Big Job. An electric OTS.

pat king · « **Reply #38 on:** April 21, 2013, 09:30:39 AM »

Here is the Ringmaster Trainer II E Fuselage.

Pat

dennis lipsett · « **Reply #39 on:** April 21, 2013, 10:20:10 AM »

Pat King Magician 60. 67.5 W/S Enya 60 for power this will be 55 oz when done or else

wwwarbird · « **Reply #40 on:** April 21, 2013, 04:58:42 PM »

Quote from: dennis lipsett on April 21, 2013, 10:20:10 AM

Pat King Magician 60. 67.5 W/S Enya 60 for power this will be 55 oz when done or else

67.5 inches?! Wow, that's a monster!

George Mitchell · « **Reply #41 on:** April 21, 2013, 06:30:47 PM »

Steve Busso VEGAS with ST 46

Allan Perret · « **Reply #42 on:** April 21, 2013, 07:39:35 PM »

Started my first electric today, Bob Hunt's Crossfire Extreme. I made a jig today to edge sand the wing sheeting skins. Works real good, makes for invisible seams. I got foam cores from Hunt for the wings (with integral flaps), stab, & elevator about a year ago; got the plans this past Friday. Just finished gluing the 4 wing panel skins, used Titebond so they should be ready to sand in about an hour. Each panel is a 4" sheet and two 3" sheets. The picture shows just the eight 3" sheets; they are not yet glued, just laying edge to edge.

Curare · « **Reply #43 on:** April 21, 2013, 08:20:34 PM »

Here's my little 1/2a flapped plank model, jigged up and ready for gluing.

Hoss Cain · « **Reply #44 on:** April 22, 2013, 10:42:24 AM »

Quote from: Robert Storick on April 19, 2013, 11:40:34 AM

Post one build photo here and a brief description of the project for a chance for this months giveaway at a glue caddy from Mercury. I will take the names of the total entry and draw one. Good luck!

Entry's close Wendsday the 24 Photo's must be of construction not finished aircraft.

Posting to keep thread at the top. My project is sitting for almost a year without work. Picture tomorrow.

pipemakermike · « **Reply #45 on:** April 22, 2013, 03:45:12 PM »

parts cut on a sunny day sitting on the patio under a sunshade and listening to Bluegrass. Like being in heaven

I have a lovely russian combat motor for it - should be fun to fly

Mike

Andrew Borgogna · « **Reply #46 on:** April 22, 2013, 05:25:10 PM »

Here is my current project a scratch build "Lil Duper Zilch".
Andy

Dave Denison · « **Reply #47 on:** April 22, 2013, 05:55:51 PM »

Here is my scratch built, from the org.Jetco plans, Shark 45, E-Flite 32 power. Progress slow in coming.

Dave

James D. Hayes · « **Reply #48 on:** April 22, 2013, 06:58:38 PM »

This is my Dick Mathis profile stuka, build is coming along nicely. This is only my second airplane build. Both have been scratch builds

Jim Hayes

t michael jennings · « **Reply #49 on:** April 22, 2013, 08:15:55 PM »

Gentlemen,

Below is my current Don Still's Stuka Stunt. It is the Hobby Helper version.

This is a scratch build, which is most of my aircraft.

It is obviously in the priming phase. You maybe surprised the final paint job.
Stay tuned.

Smok'em if you gott'em.
Drink'em if you brought'em.

T Michael Jennings

Knoxville, TN.

Author Topic: Post one build photo here (this months giveaway) (Read 6426 times)

Mike Griffin

Eric Viglione