stunthanger.com

General control line discussion => Open Forum => Topic started by: proparc on November 28, 2013, 04:31:30 PM

Title: Plettenbergs for CL CAD
Post by: proparc on November 28, 2013, 04:31:30 PM

I am going to do some CAD drawings of high end electric motors for the CAD "parts bin". What Plettenbergs are used in CL stunt?

Thanks

Title: Re: Plettenbergs for CL Stunt
Post by: NED-088 on November 28, 2013, 04:50:44 PM

No clue about the Plettenbergs, but the high end motor in the Netherlands is the Torcman NT 350-20Z: http://www.torcman.de/motoren/NT350/nt350zl.htm (http://www.torcman.de/motoren/NT350/nt350zl.htm)

Title: Re: Plettenbergs for CL Stunt
Post by: Russell Bond on November 28, 2013, 05:05:23 PM

The (Plettenberg) Orbit 20 and 25 series.

Great motors.  ;D

Title: Re: Plettenbergs for CL Stunt
Post by: proparc on November 28, 2013, 05:10:18 PM

Quote from: Russell Bond on November 28, 2013, 05:05:23 PM

The (Plettenberg) Orbit 20 and 25 series.

Great motors.  ;D

Thanks

Title: Re: Plettenbergs for CL Stunt
Post by: proparc on November 28, 2013, 07:35:11 PM

I placed a Plettenberg Orbit 25 CAD drawing over in the CAD forum Components Section.

Title: Re: Plettenbergs for CL Stunt
Post by: jose modesto on November 28, 2013, 08:05:32 PM

Milton I use the platt 15 and 20 The 25 are to big for most models unless you need nose weight.
The 15 series fly models up to 70oz  the 15-16 and 18 are my favorites 4s motors.
Jose Modesto

Title: Re: Plettenbergs for CL Stunt
Post by: proparc on November 28, 2013, 08:29:22 PM

Thanks a lot Jose. I will draw the 15 and 20.

Title: Re: Plettenbergs for CL Stunt
Post by: proparc on November 28, 2013, 10:37:37 PM

Per Jose Modesto's recommendation, I placed a Plettenberg Orbit 20 CAD drawing in the CAD forum Components Section.