stunthanger.com

General control line discussion => Open Forum => Topic started by: Avaiojet on December 06, 2011, 03:14:34 PM

Title: Please check CFC Graphics in Vendor's Corner! Christmas Special for Graphics!
Post by: Avaiojet on December 06, 2011, 03:14:34 PM

Please visit CFC Graphics in the Vendor's Corner for my special Graphics offering for Christmas.

Please, use this link to view CFC Graphics's work and many models built by talented individuals!!

Thanks in advance!

Charles

http://www.rcuniverse.com/community/profile.cfm?section=gallery&memid=11343

Title: Re: Please check CFC Graphics in Vendor's Corner! Christmas Special for Graphics!
Post by: Paul Taylor on December 06, 2011, 07:55:48 PM

I can tell you that Charles does some great work!!! And fast too!!!

Title: Re: Please check CFC Graphics in Vendor's Corner! Christmas Special for Graphics!
Post by: Avaiojet on December 06, 2011, 08:03:06 PM

Yeah Baby!

Title: Re: Please check CFC Graphics in Vendor's Corner! Christmas Special for Graphics!
Post by: Steve Helmick on December 10, 2011, 05:02:14 PM

Charles, can you do masks of your graphic offerings, with the low-tack masking vinyl? You've never said anything about that, but a lot of folks here just don't use film.  ??? Steve

Title: Re: Please check CFC Graphics in Vendor's Corner! Christmas Special for Graphics!
Post by: Avaiojet on December 10, 2011, 06:50:42 PM

Quote from: Steve Helmick on December 10, 2011, 05:02:14 PM

Charles, can you do masks of your graphic offerings, with the low-tack masking vinyl? You've never said anything about that, but a lot of folks here just don't use film.  ??? Steve

Steve,

Sure!  

Mask material, I offer two colors, matt yellow and matt white. If necessary, I also do the drawings for each layer of color, AND

because of my airbrush and paint background, I'll get you through it. That is, for those modelers who have only some experience.

Here's an example of a model that used "masks." The other photo represents a vinyl graphic set I produced. This set, as anything else cut in vinyl, can be made in mask. Easy as pie!

I'll Post tomorrow with more information about paint masks. I'll even drop in a photo of one of my painted models. Painted in the late 80's!
CB