stunthanger.com

General control line discussion => Open Forum => Topic started by: bill stavros on June 04, 2023, 11:47:07 PM

Title: plans and foam wing cutters
Post by: bill stavros on June 04, 2023, 11:47:07 PM

I am retired now and starting to build again and need some help. Where can I get these plans and are they still available, and also who cuts foam wings?  The plans I am looking for are the profile cavalier by Tom Morris and Chevelle the designer I do not know, and last but not least agood laser cutter and  woosupplier. Sorry for the lengthy post any help will be greatly appreciated and and thank you for your patience with me.

Thankyou again

Bill stavros

Title: Re: plans and foam wing cutters
Post by: Brent Williams on June 05, 2023, 12:47:58 AM

Chevelle was by John and Jack Sunderland.  March 1998 Flying Models.  https://store.flying-models.com/catalog/product_info.php?products_id=275

Tom Morris is still around for plans and info on the profile Cavalier.

Tom Dixon can supply foam cores and sheeted wings.

Title: Re: plans and foam wing cutters
Post by: Dennis Toth on June 05, 2023, 06:20:47 AM

Bill,
Enjoy retirement, here is a free plans site you can browse for all kinds of planes - https://outerzone.co.uk/index.asp . Download and take to Kinako's and print out.

Best,    DennisT