stunthanger.com

General control line discussion => Open Forum => Topic started by: roger on January 04, 2010, 02:49:53 PM

Title: pictures
Post by: roger on January 04, 2010, 02:49:53 PM

whats the simplest way to show a pic. of my plane or projects im working on     dont say any words i dont under computers and words like "go into your prolapped hypo non engine block" dont help me a bit. D>K R%%%%

Title: Re: pictures
Post by: John Hammonds on January 04, 2010, 04:14:01 PM

Hi Roger,
 Do pictures help with words?

I'm either going to look good here or more possibly a complete idiot but here goes....

Follow the instructions in the attached image (Or not as the case may be). LL~

TTFN
John.

Title: Re: pictures
Post by: John Hammonds on January 04, 2010, 04:15:23 PM

Kin ell! it worked, what a star.  #^

Title: Re: pictures
Post by: roger on January 04, 2010, 04:21:18 PM

thanks kin ell  LL~

Title: Re: pictures
Post by: Paul Taylor on January 04, 2010, 05:30:13 PM

Hey Roger,
You will have to type something in the message. It will not let you post a empty post.

Also your photo has to be under 1MB in size.


 H^^

Title: Re: pictures
Post by: Steve Helmick on January 04, 2010, 09:56:34 PM

There is a pretty thorough thread in the Administration Forum (top one) about posting photos. Rudy Taube started the thread, and that will be the easiest way to find it...just scroll down the list of subjects and look for Rudy's name.

If you have problems, send me a Private Message (warning me to look for incomming email), and email me your pictures. I can crop, resize and compress your pictures in about 20 seconds apiece, or less. Then, I would mail them back to you, ready to post. Limited time offer! I will also help you with the process, if you will download IrfanView (or get the neighbor's kid to do it). It's a small program, under 1,000kb, so isn't that bad, even on a dialup connection. Holla!   H^^ Steve

Title: Re: pictures
Post by: john e. holliday on January 05, 2010, 08:38:12 AM

Hi Steve,  the old DOC here,  I tried Infranview as you stated a while ago and the program the wife had in the computor bombed out.  It was not compatable.  The program she has loaded now has its faults, but at least my Kodak program works.  Technology is great if you know what you are doing. %^@ %^@

Title: Re: pictures
Post by: Paul Taylor on January 05, 2010, 09:36:38 AM

Hey to crop and resize give Picasa a try. Not sure who turned me on to it but it is easy and FREE! #^

Title: Re: pictures
Post by: Steve Helmick on January 07, 2010, 06:57:52 PM

Quote from: john e. holliday on January 05, 2010, 08:38:12 AM

Hi Steve,  the old DOC here,  I tried Infranview as you stated a while ago and the program the wife had in the computor bombed out.  It was not compatable.  The program she has loaded now has its faults, but at least my Kodak program works.  Technology is great if you know what you are doing. %^@ %^@

Doc...When you download IrfanView, there are various versions...one for MAC's, one for Winders MX, one for Winders 97, etc. Get the wrong one,  &  I guess you'd have problems! Haven't heard of "The Program", but a good 'puter geek could probably find the setting that's wrong...ain't me! But I will code html for akahol.... LL~ Steve

Title: Re: pictures
Post by: Peter Nevai on January 08, 2010, 02:14:47 PM

Google's PICASA for pictures. Its Free.

http://picasa.google.com/

Title: Re: pictures
Post by: Steve Helmick on January 08, 2010, 06:17:16 PM

"Google's PICASA for pictures. Its Free."


So is IrfanView...FREE. Pick one! Either is likely much easier than your camera's software, tho they will all do the same tricks...pretty much. I'm sure PICASA will have different versions for MAC's, Win97, MX, DX, and MS_BFD. I doubt they have a version for "The Program" (Doc's).   H^^ Steve