stunthanger.com
General control line discussion => Open Forum => Topic started by: Leonard Bourel on September 08, 2023, 07:10:07 PM
-
The new plane
-
Sweet!
-
Two thumbs up...
-
Very nice.
-
Outstanding!!!
Best of luck with it!
-
Seem appropriate...
https://www.youtube.com/watch?v=AQdpR-Uu3sw
Weather looks good this weekend to find out :)
-
Looking good Buddy!!!👍
-
I like it. D>K
-
Sharp. Looking forward to a performance report.
-
Well done AGAIN!!! Hope you can bring it to the WC next year...
-
Nice and shiny! Well done.
-
Looking good.
What motor are you pulling it with?
-
Hey guys Good news I test flew the plane this morning and it flies just great Still needs a few minor changes but all things considered a really good day Wings level engine run same both ways A little tight on fuel with 5.5 Oz with PA 61 on pipe. Turn is good both ways Thanks for the nice comments guys.
-
Good flight report.
👍🏼
PA good choice. 👍🏼👍🏼
-
flew plane again today line tension a little weak moved leadout guide back a little seemed to help. I am running 13inch 4 pitch bolly 3 blade prop cut to 12 inches running motor at 10 500rpm seems happy. but fuel consumption a little higher than expected I need to remove 5.5 oz tank and custom make a 6oz tank tomorrow
-
I'd put 2 oz of Coleman fuel in a gallon of glow fuel and see if that would fix the fuel consumption problem. Still, you always want to have a tank bigger than needed, so you can fill it and then remove 10cc ~ 20cc as needed to suit the weather conditions.
Is that real CF cloth/epoxy, or Ultra-Cote trim sheet? If it is film, what do you have under it? H^^ Steve
-
Looks great Len!
-
Hi Steve it is ultra coat on the flaps ,elevators and rudder Thanks Chris see you in Winnipeg
-
looks great Len
Glad you are happy with the flight characteristics as well...as I have learned.. a pretty airplane that flies poorly does you no good y1
-
Ya Tim so true they either crash get given away or end up as hanger queens or they make you crazy I have MANY!!!