stunthanger.com

General control line discussion => Open Forum => Topic started by: Mike Griffin on October 10, 2013, 02:15:32 PM

Title: Paul Delgatto's B 25
Post by: Mike Griffin on October 10, 2013, 02:15:32 PM

I have posted this in the scale forum as well.  I am going to build the Paul Delgatto version of the B25.  I have the plans but have a couple of questions that maybe someone can help me with.  First I cannot find any mention of or a diagram of wing dihedral.  Was this plan drqwn with no dihedral?  The second thing is that the leadouts as shown on the plan, run right through where the fuel tank in the nacelle is located and somehow I need to reroute them,  Any suggestions here from anyone who might have built this model or has the plans?

I appreciate any input from anyone who might have built this model or is familiar with this plan.

Mike

Title: Re: Paul Delgatto's B 25
Post by: Allen Brickhaus on October 10, 2013, 02:25:11 PM

Call me.

Allen

Title: Re: Paul Delgatto's B 25
Post by: Mike Keville on October 10, 2013, 05:14:40 PM

Leroy Black flew one of those in Classic at a VSC several years ago.  Did rather well with it, too.  Pair of LA .25s, or maybe .15s?

Title: Re: Paul Delgatto's B 25
Post by: Allen Brickhaus on October 10, 2013, 06:57:10 PM

I have four Byron Barker tuned OS Max 20S engines ready to build for the B-25 and several metal and F.G. cowls also.

Allen

Title: Re: Paul Delgatto's B 25
Post by: Clancy Arnold on October 10, 2013, 07:29:40 PM

Mike
I had that same problem on the C-7A Caribou FAI Scale model I flew several years ago.  I just ran two 1/4 inch brass tubs through the tank and soldered them in place.  The leadouts passed through the tank inside the tubes for three years with no problems.
Clancy

Title: Re: Paul Delgatto's B 25
Post by: Mike Griffin on October 10, 2013, 09:21:05 PM

Had not thought about that at all Clancy.. good idea...thank you

Mike

Title: Re: Paul Delgatto's B 25
Post by: Serge_Krauss on October 12, 2013, 01:59:36 AM

These are of Leroy Black's B-25 from VSC 14 in , I think, 2002.

Title: Re: Paul Delgatto's B 25
Post by: builditright on October 15, 2013, 11:36:12 PM

Hey Mike,

I have cut files for this, so let me know if you need some laser cut parts.
 #^

Title: Re: Paul Delgatto's B 25
Post by: MarcusCordeiro on October 16, 2013, 04:57:14 AM

Hi Walter

Sent you a PM...
Mike, you see what you started? LL~ VD~ H^^

Marcus

Title: Re: Paul Delgatto's B 25
Post by: MarcusCordeiro on October 20, 2013, 03:45:08 PM

And Walter has answered, he's such a gentleman...
It seems I'll building one B-25 after all....


Marcus