stunthanger.com

General control line discussion => Open Forum => Topic started by: Gregory Hammond on January 19, 2015, 01:16:30 AM

Title: Original Tutor
Post by: Gregory Hammond on January 19, 2015, 01:16:30 AM

Hello everyone,

I was given a large lot of control line plans from an older gentleman who liked the idea of an R/C 3D guy was returning to C/L after many years :)

Within the lot of plans was the original tutor plan, creased and a little beat up.

I was wondering if anyone has individual ribs for this model?
I'm not great at doing rib sandwich method so rib set would really be appreciated

I have a mint OS-max-S 35 I would like to use, also an ABN 25FP
Any suggestions would be appreciated

Regards
Gregory

Title: Re: Original Tutor
Post by: Brent Williams on January 19, 2015, 02:55:14 AM

Eric Rule at RSM has started kitting the original Tutor.  I would check with him for a set of ribs.

RSM contact info: eric@rsmdistribution.com or call 951-678-1406 (Pacific Time Zone)

(http://i60.tinypic.com/2a5ke4i.jpg)

Title: Re: Original Tutor
Post by: Balsa Butcher on January 19, 2015, 09:49:23 AM

Aww, just buy the kit from Eric at RSM, price is reasonable, RSM kits are very high quality. You won't regret it. As far as engines go, either one would be a good choice.  ;D