stunthanger.com

General control line discussion => Open Forum => Topic started by: Paul Taylor on September 10, 2007, 06:57:34 AM

Title: On Line source for OS 40-FP NVA ???
Post by: Paul Taylor on September 10, 2007, 06:57:34 AM
I went to order a few spare NVA's for my LA .40 and Tower has them on Back order. I found them on a few other sites but they are priced a little high.

Anyone have a good on-line source that has them priced right and ships fast? I would like to have them before the Memphis contest this weekend. Sept 15 and 16.

O.S. Needle Assembly 20-25FP-S  Manufacturer Stock# 22311000
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXCR49&P=ML


Thanks
Paul H^^
Title: Re: On Line source for OS 40-FP NVA ???
Post by: Leester on September 10, 2007, 08:08:19 AM
Paul: you could call Randy Smith and see if he carries them or Virginia Hobbysport has them listed at 12.23
Title: Re: On Line source for OS 40-FP NVA ???
Post by: Ward Van Duzer on September 10, 2007, 08:21:29 AM
Randy's PA needle valve assemblies aren't cheep, but are far better than OS, and ST's...


W.
Title: Re: On Line source for OS 40-FP NVA ???
Post by: Wynn Robins on September 10, 2007, 03:04:45 PM
Paul - how many times do I have to tell ya - write to Joe at www.sshobbies.com - he carries them
Title: Re: On Line source for OS 40-FP NVA ???
Post by: RandySmith on September 10, 2007, 03:40:18 PM
Quote from: rootbeard on September 10, 2007, 06:57:34 AM
I went to order a few spare NVA's for my LA .40 and Tower has them on Back order. I found them on a few other sites but they are priced a little high.

Anyone have a good on-line source that has them priced right and ships fast? I would like to have them before the Memphis contest this weekend. Sept 15 and 16.

O.S. Needle Assembly 20-25FP-S  Manufacturer Stock# 22311000
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXCR49&P=ML


Thanks
Paul H^^




HI Paul

I have them and many  more  NVAs in stock

Regards
Randy
Title: Re: On Line source for OS 40-FP NVA ???
Post by: RC Storick on September 10, 2007, 03:47:42 PM
Quote from: Ward Van Duzer on September 10, 2007, 08:21:29 AM
Randy's PA needle valve assemblies aren't cheep, but are far better than OS, and ST's...
W.

I buy Snap-On tools (the best money can buy) and they are pricey. However I get the service I need. If you buy from Randy not only do you get the quality expected but the service to go with it. Can you call Tower and ask a question and expect a response you can depend on? You can with Randy!

I am considered a good builder (expert) However even experts consult with other experts.

Thats why they make books! I hope you get the drift...
Title: Re: On Line source for OS 40-FP NVA ???
Post by: SteveMoon on September 12, 2007, 10:53:22 AM
Paul: Do yourself a favor and order from Randy, or
one of the other sources listed and NOT Tower.

Steve