stunthanger.com
General control line discussion => Open Forum => Topic started by: RC Storick on February 03, 2007, 05:55:38 PM
-
I purchased a JVC GZ-MG21U Hard disk camcorder. It has a 20 gig hard drive ,so no tape or cards to read. I can record a video and upload it right to the site or make a disk. The investment was high, I am hoping some will buy!
I bought it for interviews and contest flying to be displayed on the magazine site but would it be worth 19.95 a disk to see how I finish? Or some other process I use in building? Just trying to recoup the cost of the camera.
-
I think it's a great idea. Hopefully you will get your investment back, plus!
-
Sounds good to me too. Maybe a 2 disc series on your next build. 2 hrs a disc, aught to cover one of your builds ok. LL~ LL~ **) **) **)
-
I have a copy of the first tapes Windy made (the "first" Nobler Build). Four tapes in all and at least 3 hours plus of sanding and painting on dope with a brush! **) **) **)
His tapes have improved considerably since then! y1
(but you still are going to get "the rest of the story"!) ;D
-
Just remember Robert that it was a certain "Proparc" back at the "other" forum that badgered you to do this. I still have those posts!!
-
Robert,
Great idea!
With content and quality we have grown to expect from you, keep the price competitive and you will have another "winner". y1
Roger
-
Just remember Robert that it was a certain "Proparc" back at the "other" forum that badgered you to do this. I still have those posts!!
I remember. I just didn't have the equipment, everything takes time.
-
Nobody has come right out and said it so I'm gonna. You make them I'll buy them.
Bill Gruby <=
-
Robert, This is great news!! Not only would I like to see top notch build recordings, I would also like to see some of the same things show up in the on-line magazine as well. Perhaps snippets of a build DVD. y1
-
Hi robert
Count me in ! great build tapes are always worth it you make them I'll buy them
#^ #^ #^ #^ #^ #^
-
I would buy "How-to" DVDs.
Henry :)
-
Would buy dvd's as soon as they are available. Would like to see a series on just building and finnishing. Hardware installs, engine tank installs, Wing and tail to fuse ect. There are alot of common technics that most take as common knowledge and are never really shown in detail so press on I'll buy a set.Walter #^
-
Ditto to all of the above...
Cheers
Harry
-
Bob,
Your support is Obvious. Keep going!
I ditto all the above.
Ted W o2oP
-
ALooks like most have beat me to the punch. But, count the old DOC Holliday in for the DVD's. It would be great to see hjow you do it. Stills don't quite hack it. Later, DOC Holliday
-
I'd like to see how you do your rattle can finishes!! y1 :!
Thanks
Dwayne