News:



  • May 29, 2024, 05:49:05 AM

Login with username, password and session length

Author Topic: Dooling 61  (Read 5535 times)

Offline Robert Zambelli

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2927
Dooling 61
« on: November 17, 2010, 08:31:06 AM »
I found this with a bunch of old engines.
I recall the Dooling 29 being very popular in speed in the 50s but I know nothing about the 61.
This one is spark ignition and new - never run. No box, no instructions.
I plan to run it on a test stand soon. Should be interesting.
Then, it goes.

Are any of you engine gurus familiar with it? Value?

Bob Z.

Offline W.D. Roland

  • AMA Member and supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1152
Re: Dooling 61
« Reply #1 on: November 17, 2010, 10:24:40 AM »
Don't run it!
Value un-run is probably higher than you would believe. n~

This is what Dick McCoy had to compete against. To my knowledge he never out ran the Dooling in the cars and only barely in airplanes.
David Roland
51336

Offline Bill Gruby

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1488
Re: Dooling 61
« Reply #2 on: November 17, 2010, 10:34:51 AM »
 Bob;

  That's a 1948 Dooling .61 7 fin. The 1947 had 10 fins. Both were sparkers. It's a collectors motor for sure but not as much as the ten fin .61. You can bench run it, you won't hurt it any. It likes nitro but don't be excessive. 20% will give you a big RUSH. Last one I saw on the bay (7 fin) topped 300.  VD~

  "Billy G"  y1
« Last Edit: November 17, 2010, 11:00:06 AM by Bill Gruby »
Bill Gruby
AMA 94433
MECA 5393-10

Offline Marvin Denny

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 889
  • Welcome to the Stunt Hanger.
Re: Dooling 61
« Reply #3 on: November 17, 2010, 10:56:10 AM »
  I ran them in speed in the early 50s.  Never set any records with them and while I did win some smaller contests with them, I ALWAYS got beat by the "big" boys and their McCoys--- DeBolt, Grish, Hall & Massey and a host ofothers.   The best I could get out of mine was in the 150 MPH range. If I remember,   9" X 10" and 9" X 12" toothpick props were the thing to start with, then trim to perfection.

  Bigiron
marvin Denny  AMA  499

Offline Robert Zambelli

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2927
Re: Dooling 61
« Reply #4 on: November 19, 2010, 02:38:41 PM »
 Hi, Gents - thanks for the great info.
Since I have no use for the Dooling, I will donate it to the Brodak Museum.

THANKS AGAIN!

Bob Z.


 
 

Online Dennis Adamisin

  • 2019 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 4346
Re: Dooling 61
« Reply #5 on: November 21, 2010, 08:17:37 AM »
I dunno Z-man, I think the Dooling would offer a tidy power up versus the OK 60 in your Viking.  Will help it in the wind you know...  :o  >:D  ;D
Denny Adamisin
Fort Wayne, IN

As I've grown older, I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake!

Offline Garf

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1817
    • Hangar Flying
Re: Dooling 61
« Reply #6 on: November 22, 2010, 05:44:21 PM »
Hi, Gents - thanks for the great info.
Since I have no use for the Dooling, I will donate it to the Brodak Museum.

THANKS AGAIN!

Bob Z.
You might want to think twice about donating it.
« Last Edit: November 22, 2010, 06:03:08 PM by Garf »

Offline dennis lipsett

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1719
Re: Dooling 61
« Reply #7 on: November 22, 2010, 11:36:03 PM »
Bob,
I hope that you have taken a tax credit for the engines that you have donated.
Dennis

Offline Robert Zambelli

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2927
Re: Dooling 61
« Reply #8 on: November 27, 2010, 07:56:40 AM »
Hi, Dennis - I think that putting the Dooling 61 in the Viking would turn it into a "take-apart", or more likey a "come-apart"!!!

Bob Z.

Online Dennis Adamisin

  • 2019 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 4346
Re: Dooling 61
« Reply #9 on: November 27, 2010, 08:05:24 AM »
Hi, Dennis - I think that putting the Dooling 61 in the Viking would turn it into a "take-apart", or more likey a "come-apart"!!!

Bob Z.

...and Sable might lose her top; uh, I meant her HELMET!  :o   LL~  LL~  LL~
Denny Adamisin
Fort Wayne, IN

As I've grown older, I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake!

Offline john e. holliday

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22783
Re: Dooling 61
« Reply #10 on: November 27, 2010, 10:34:43 AM »
Bob,
I hope that you have taken a tax credit for the engines that you have donated.
Dennis


Are we allowed to do that?  When selling a kit worth $100.00 it might go for $50.00.  Same kit trying to buy I get over bid by $50.00 or more.  Just seen a Sterling Flying Fool closed at $125.00 plus shipping.  Now for the Dooling .61 it might fill a void in the museum. H^^
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Offline dennis lipsett

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1719
Re: Dooling 61
« Reply #11 on: November 28, 2010, 12:16:09 AM »

Are we allowed to do that?  When selling a kit worth $100.00 it might go for $50.00.  Same kit trying to buy I get over bid by $50.00 or more.  Just seen a Sterling Flying Fool closed at $125.00 plus shipping.  Now for the Dooling .61 it might fill a void in the museum. H^^

Yes, you could claim things like that for a tax exclusion. If I donated a few Underwood Yellow Jackets that were worth a few thou a piece you bet I'd claim it.You claim charitable donations, contributions to your church. everything can have an exclusion if it's worth enough.
Dennis


Advertise Here
Tags:
 


Advertise Here