stunthanger.com

General control line discussion => Open Forum => Topic started by: David_Ruff on October 13, 2024, 05:04:24 PM

Title: North Alabama Flyers; All CL stuff needs to go
Post by: David_Ruff on October 13, 2024, 05:04:24 PM

North Alabama flyers (or anyone)

I am clearing out all my CL stuff.  I have two profiles built and ready to fly.  Have three kits; Humongous, Ringmaster and Zilch 48.
Three Fox 35 Stunts two of which are hi perf; L&J and other is like the L&J with all the good stuff.  All run great.  Also have a Fox .59 Stunt; short crank and it runs like a champ.
In addition I have parts, flight box, handle, lines, etc.  Have a ton of props, some Dixon bellcrank assys.  Have lots of hardware and engine parts.  Lots of stuff.  Only thing I don't have is fuel.

I don't want to piecemeal this stuff out.  Just want someone to take it all off my hands and give it a good home.  Prefer if you come to my place and pick it all up.  I am in Eva, AL. 

Title: Re: North Alabama Flyers; All CL stuff needs to go
Post by: Motorman on October 13, 2024, 08:15:35 PM

If you want to throw all the engines, parts, props and what ever fits in a big box and ship it out, I'll pay shipping and give it a good home. Send PM for address.

Thanks,
MM :)

Title: Re: North Alabama Flyers; All CL stuff needs to go
Post by: Ty Marcucci on October 13, 2024, 11:40:06 PM

HI Dave.. We have a new man in the club getting back into CL and might want your items.. I'll let him know. Ty

Title: Re: North Alabama Flyers; All CL stuff needs to go
Post by: David_Ruff on October 14, 2024, 12:48:59 AM

Ty

I will wait and see if your new guy wants this stuff.  Please let me know.  All he needs is fuel and he is flying.

Thanks

Title: Re: North Alabama Flyers; All CL stuff needs to go
Post by: JoeGlow1985 on October 14, 2024, 11:24:44 AM

Thanks for notifying me Ty. 

Hi David.  I live close to Eva in Hartselle and am interested.  Please send me your contact information. 

Joe Lacey

Title: Re: North Alabama Flyers; All CL stuff needs to go
Post by: mike londke on October 14, 2024, 11:59:27 AM

PM sent.