stunthanger.com

General control line discussion => Open Forum => Topic started by: john e. holliday on March 22, 2023, 04:32:18 PM

Title: No response
Post by: john e. holliday on March 22, 2023, 04:32:18 PM

Since getting on Face Book to look at VSC reports plus picture I see a gentleman is making mufflers.  I have sent several messages and still no response from him.  The site he lists does not work.  Or as my grand daughter says I need help. D>K

Title: Re: No response
Post by: Al Ferraro on March 22, 2023, 06:56:16 PM

 If you are talking about Stan Frady he does nice work. I bought 2 of his McCoy .35/.40 Lightning Bolt tongue mufflers with the engraving.
Al

Title: Re: No response
Post by: john e. holliday on March 23, 2023, 10:17:39 AM

I would like to buy two mufflers for the McCoy Red Head 35's I have on my Flite Streaks.  D>K

Title: Re: No response
Post by: Tony Drago on March 23, 2023, 10:36:10 AM

 Sent you a PM. Also check item number on Ebay. 334701836539

Title: Re: No response
Post by: john e. holliday on March 23, 2023, 10:47:42 AM

Thanks to Tony I now have two mufflers on the way. H^^

Title: Re: No response
Post by: Tony Drago on March 23, 2023, 10:57:15 AM

Your welcome.

Title: Re: No response
Post by: Steve Helmick on March 23, 2023, 02:00:38 PM

Entirely out of curiosity, does anybody have an opinion if it matters that the exhaust outlet holes are inline or at 90 degrees to the flow from the exhaust stack? It reduces the mill setups by one, which isn't a bad thing, but I was just wondering if the normal 90 degree change of direction would do anything to reduce noise. I'm pretty sure it would impede flow. It seems that the straight shot of Stan Frady's tongue mufflers would be great for profiles with side mounted engines, to reduce oil on the model.  D>K Steve