News:



  • July 03, 2025, 08:21:24 PM

Login with username, password and session length

Author Topic: Need an article from Model Aviation, can print out?  (Read 1462 times)

Offline Allen Brickhaus

  • ACE
  • Trade Count: (0)
  • Captain
  • ****
  • Posts: 862
  • Welcome to the Stunt Hanger.

Offline EddyR

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 2574
Re: Need an article from Model Aviation, can print out?
« Reply #1 on: February 10, 2013, 04:55:37 PM »
Thanks Allen that work really good y1 y1 y1 y1 y1 y1 y1
Ed Ruane
Locust NC 40 miles from the Huntersville field

Offline Allen Brickhaus

  • ACE
  • Trade Count: (0)
  • Captain
  • ****
  • Posts: 862
  • Welcome to the Stunt Hanger.
Re: Need an article from Model Aviation, can print out?
« Reply #2 on: February 10, 2013, 05:12:40 PM »
You are quite welcome.

Offline john e. holliday

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22989
Re: Need an article from Model Aviation, can print out?
« Reply #3 on: February 11, 2013, 08:05:21 AM »
Thanks also from the old DOC.  The link is now in my favorites.
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Offline Ted Fancher

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2345
Re: Need an article from Model Aviation, can print out?
« Reply #4 on: February 11, 2013, 10:23:43 AM »
Thanks also from the old DOC.  The link is now in my favorites.

Same here Allen,

You're all right.   Ya know what?   They ought to elect you to the PAMPA Hall of Fame!  Oh....wait...

Ted

Offline Ted Fancher

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2345
Re: Need an article from Model Aviation, can print out?
« Reply #5 on: February 11, 2013, 10:27:05 AM »
Allen,

Is there a way to access columns from that URL?  I still get a lot of questions about my stunt columns from back in antiquity.  It would sure be convenient to direct people to them.

Ted

Online Tim Wescott

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12904
Re: Need an article from Model Aviation, can print out?
« Reply #6 on: February 11, 2013, 10:33:17 AM »
Is there a way to access columns from that URL?  I still get a lot of questions about my stunt columns from back in antiquity.  It would sure be convenient to direct people to them.

The last time I looked at a column in the archives I had to look at it page-by-page, it wasn't indexed as a column.  It takes some work to wade through.  I don't know if they've gotten better.
AMA 64232

The problem with electric is that once you get the smoke generator and sound system installed, the plane is too heavy.

Offline Allen Brickhaus

  • ACE
  • Trade Count: (0)
  • Captain
  • ****
  • Posts: 862
  • Welcome to the Stunt Hanger.
Re: Need an article from Model Aviation, can print out?
« Reply #7 on: February 11, 2013, 02:37:29 PM »
I so wish I could have a copy of all of my columns also in a booklet type form.  Using a URL version to do this would be great.

Thanks, Ted.

From Allen

Offline Steve Helmick

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 10267
Re: Need an article from Model Aviation, can print out?
« Reply #8 on: February 11, 2013, 03:10:22 PM »
When I clicked on the link, I got a notice of website "Certificate" issues...but I went ahead and found the article as advertised. It worked fine, other than that. My guess is that it's browser settings or just browser versions that seem to cause this. Maybe somebody that knows about this certification stuff could comment?  H^^ Steve
"The United States has become a place where professional athletes and entertainers are mistaken for people of importance." - Robert Heinlein

In 1944 18-20 year old's stormed beaches, and parachuted behind enemy lines to almost certain death.  In 2015 18-20 year old's need safe zones so people don't hurt their feelings.

Offline Mike Lauerman

  • 2016 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 440
Re: Need an article from Model Aviation, can print out?
« Reply #9 on: February 11, 2013, 04:01:50 PM »
This is wonderful, Allen.  My stack of Model Aviation mags is higher than the beanstalk I traded the ol' cow for.

Offline Ted Fancher

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2345
Re: Need an article from Model Aviation, can print out?
« Reply #10 on: February 11, 2013, 10:27:52 PM »
Allen,

I fiddled with the site and found by searching for "aerobatics" in the title and "ted Fancher" in the author boxes and then citing an appropriate range of years I could access them all.  To this point, however, I've found no way to maintain access to the "list of columns" when I click on one to read.  Have to start all over again.  I could probably do them in two different windows and cut and past the urls from the list in one window to the address bar in the other.  Not impossible, just sort of a  pain to have them all listed and then disappear when you select one.

Still, about 10,000% better than what I had starting the day!

Thanks Allen.

Offline Allen Brickhaus

  • ACE
  • Trade Count: (0)
  • Captain
  • ****
  • Posts: 862
  • Welcome to the Stunt Hanger.
Re: Need an article from Model Aviation, can print out?
« Reply #11 on: February 12, 2013, 05:45:07 AM »
You are quite welcome.

Allen

Offline bettymzimmerman

  • Trade Count: (0)
  • New Pilot
  • *
  • Posts: 1
Happy Valentine Photoshop
« Reply #12 on: February 12, 2013, 06:50:48 AM »
Despite the security she got me. But she cant spam again!
« Last Edit: February 12, 2013, 09:04:35 AM by Robert Storick »

Offline RC Storick

  • Forum owner
  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12566
  • The finish starts with the first piece of wood cut
    • Stunt Hangar
Re: Need an article from Model Aviation, can print out?
« Reply #13 on: February 12, 2013, 09:05:06 AM »
she got me but I got her!
AMA 12366

Offline john e. holliday

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22989
Re: Need an article from Model Aviation, can print out?
« Reply #14 on: February 12, 2013, 09:21:30 AM »
Boy that was quick.   Now back to the thread.  It seems that todays generation is becoming lazy and want someone to do the work for them.  I can see getting someone to help after a person has done a search and can't find what they wanted.   Especially some of us, like me that have been on here a long time.  The new comers have to learn to use the tools at hand.  Granted some stuff has been lost do to some person causing the system to go down.   I commend Sparky and all his administrative staff for keeping the site going.
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.


Advertise Here
Tags: