stunthanger.com

General control line discussion => Open Forum => Topic started by: Ken Culbertson on March 21, 2020, 01:11:05 PM

Title: Need a Cobra 3520/14
Post by: Ken Culbertson on March 21, 2020, 01:11:05 PM

It is possible that there simply are no electric motors looking for a new home but I thought I would check here before ordering a new one.

If anybody wants to part with a Cobra 3520/14 and/or 2820/12 and it is not abused or in need of bearings I would love to take it off of your hands for a fair price.  I specify those two because I have mounts on order that will fit them.  Other equivalent brands/sizes that will fit a Cobra front mount would also be considered.  If I can't find a used one I would rather find a new home for a NIB that one of our community has than order a new one.

Ken

Title: Re: Need a Cobra 3520/14
Post by: Fred Underwood on March 21, 2020, 02:04:49 PM

I believe that most of the Cobra 28 series and 35 series share mounting holes at 25mm.

Nose around here and most show the x mount hole spacing.
https://innov8tivedesigns.com/manufacturers/cobra/cobra-c-3515-18-brushless-motor-kv-740

Title: Re: Need a Cobra 3520/14
Post by: Ken Culbertson on March 21, 2020, 02:57:37 PM

Quote from: Fred Underwood on March 21, 2020, 02:04:49 PM

I believe that most of the Cobra 28 series and 35 series share mounting holes at 25mm.

Nose around here and most show the x mount hole spacing.
https://innov8tivedesigns.com/manufacturers/cobra/cobra-c-3515-18-brushless-motor-kv-740

You are right, the front mount is the same on both.  Different "X" but same spacing on mount.
So I can revise my request to any equivalent motor with a 25mm front mount.

Thanks - Ken

Title: Re: Need a Cobra 3520/14
Post by: John Rist on March 21, 2020, 04:34:56 PM

New Cobra motors are reasonable priced.  I am not sure I would fool with a used one.  https://innov8tivedesigns.com/

Title: Re: Need a Cobra 3520/14
Post by: Ken Culbertson on March 21, 2020, 05:52:52 PM

Quote from: John Rist on March 21, 2020, 04:34:56 PM

New Cobra motors are reasonable priced.  I am not sure I would fool with a used one.  https://innov8tivedesigns.com/

Normally I would but there is so much stuff being unused in the community that I thought I might take up some slack.  If there aren't any I will go new.  They are cheap for what they do.  The only parts that "wears out" are the bearings and they are easy to change.

Ken

Title: Re: Need a Cobra 3520/14
Post by: Howard Rush on March 21, 2020, 06:24:43 PM

I have what I think is a 3520/14. I don’t know, Ken, I send you stuff and you just burn it up.

Title: Re: Need a Cobra 3520/14
Post by: Ken Culbertson on March 21, 2020, 08:02:19 PM

Quote from: Howard Rush on March 21, 2020, 06:24:43 PM

I have what I think is a 3520/14. I don’t know, Ken, I send you stuff and you just burn it up.

Those Vortex Generators were so hot that the Fire Marshall thought they started it! LL~
If you have one, you have to let me pay you something for it.  No rush, I am collecting the parts for a fall project when "this" gets cleared and rebuilt  FYI, they survived the fire but were buried when the roof fell in on them in my office.

Ken

Title: Re: Need a Cobra 3520/14
Post by: Howard Rush on March 23, 2020, 02:45:13 PM

Oops. It’s not a Cobra. It’s an E-flite from which the label fell off. Never mind.

Title: Re: Need a Cobra 3520/14
Post by: Rick Campbell on March 25, 2020, 11:35:20 AM

PM sent.