stunthanger.com
General control line discussion => Open Forum => Topic started by: Paul Taylor on January 21, 2008, 04:20:48 PM
-
I now belong to the Brotherhood.
Not real good looking but at least I have one.
What do ya think?
Paul <=
-
OK what's up? ^-^
I have nothing to scale it against, but it looks kind of small.
Something seems fishy here.
-
Yeah! Fuselage looks longer than wing. Whats up Rootbeard???
-
Leadouts????
-
OK what's up? ^-^
I have nothing to scale it against, but it looks kind of small.
Something seems fishy here.
As in there is only a fuselage and a tail, the wing is virtual, and shown as inserted at a wrong angle, or it's had a Ring Jr's (or maybe a baby Ring's) wing slid into it, at that wrong angle, and photoshop was used to fuzz over the lack of a joint.
D>K
-
OK what's up? ^-^
I have nothing to scale it against, but it looks kind of small.
Something seems fishy here.
I agree. That is obviously not a full scale Ring. What's going on here, Paul?
-
n1 n1 n1 The Mountain Brotherhood gonna breaka his face :o :o y1 y1
-
Well it depends on what scale you are talking about???
I think it turned out kind of nice. Took all of about 20mins to build and color with markers.
I will try and test fly it this week if I can get the fuel mixed for that engine. LL~
You guys have sharp eyes.
Paul H^^
-
Neato! :D
Is it balsa?
The motor looks the most realistic, how is it made?
-
Well it depends on what scale you are talking about???
I think it turned out kind of nice. Took all of about 20mins to build and color with markers.
I will try and test fly it this week if I can get the fuel mixed for that engine. LL~
You guys have sharp eyes.
Paul H^^
Youve got too much time on your hands and besides I see no scratches HB~> HB~>
-
Yup it is balsa. The engine is a old 4-40 cut off and screwed in the nose. Still need to make a fuel tank. <=
Not much time tied up in this build. I just needed to finish a plane. #^
After sanding all weekend a plane had to be built.
-
Good show Paul! Love it! You gotta save this kind of stuff for April 1st! I posted a pic of a control horn made from 3/8 steel rod a couple years ago on Stuka, said 'it's for a 1/4 scale stunter I'm building'. Thus forever cementing my rep as a wack job over there. n~
-
I hate to be the thorn in this as it aint even close to looking like a Ringmaster. Proportions are all wrong. DOC Holliday
-
No worries Doc.
It was just done on the fly, and pulled it from memory. No plans, just free hand. #^
I will try to do better on my Cardinal.
Paul H^^
-
I hate to be the thorn in this as it aint even close to looking like a Ringmaster. Proportions are all wrong. DOC Holliday
Doc,
Paul says he is Charles Atlas too...but he ain't proportioned right for that either VD~
-
Paul,
You should consider marketing this as a ARF. I'll bet it sells like hotcakes.
Joe Connelly
-
OK Joe,
I will put a kit together and send it to you to test it out for me.
Just don't let Chris fly it. Not sure he can get one flip starts with that engine. It's not blue. LL~
Paul H^^
Go Packers! Oh never mind. :-[
-
That looks cool Paul, and it will fit in your shirt pocket also.
-
Now you need some .0001 lines, and a teency weency handle. LL~
-
OK Joe,
I will put a kit together and send it to you to test it out for me.
Just don't let Chris fly it. Not sure he can get one flip starts with that engine. It's not blue. LL~
Hey, my one flips are with silver engines. Not so good with the blue ones yet. LL~
I want to fly it though, see what it can do. #^
-
Here is my recently scratch built Ringmaster...does it look real? y1 H^^
-
That is more like it. DOC Holliday
-
Doc,
Paul says he is Charles Atlas too...but he ain't proportioned right for that either VD~
It might be possible you and I are the only ones who know who Charles Atlas was. LL~ LL~ LL~ LL~ LL~ LL~ LL~ LL~ LL~ LL~ LL~ LL~ LL~ LL~ HB~>
-
I don't know... I think we look a lot alike. His hair might be a little longer then mine.