Need a Cobra 3520/14

[Ken Culbertson]

It is possible that there simply are no electric motors looking for a new home but I thought I would check here before ordering a new one.

If anybody wants to part with a Cobra 3520/14 and/or 2820/12 and it is not abused or in need of bearings I would love to take it off of your hands for a fair price.  I specify those two because I have mounts on order that will fit them.  Other equivalent brands/sizes that will fit a Cobra front mount would also be considered.  If I can't find a used one I would rather find a new home for a NIB that one of our community has than order a new one.

Ken

[Fred Underwood]

I believe that most of the Cobra 28 series and 35 series share mounting holes at 25mm.

Nose around here and most show the x mount hole spacing.
https://innov8tivedesigns.com/manufacturers/cobra/cobra-c-3515-18-brushless-motor-kv-740

[Ken Culbertson]

I believe that most of the Cobra 28 series and 35 series share mounting holes at 25mm.

Nose around here and most show the x mount hole spacing.
https://innov8tivedesigns.com/manufacturers/cobra/cobra-c-3515-18-brushless-motor-kv-740

You are right, the front mount is the same on both.  Different "X" but same spacing on mount.
So I can revise my request to any equivalent motor with a 25mm front mount.

Thanks - Ken

[John Rist]

New Cobra motors are reasonable priced.  I am not sure I would fool with a used one.  https://innov8tivedesigns.com/

[Ken Culbertson]

New Cobra motors are reasonable priced.  I am not sure I would fool with a used one.  https://innov8tivedesigns.com/

Normally I would but there is so much stuff being unused in the community that I thought I might take up some slack.  If there aren't any I will go new.  They are cheap for what they do.  The only parts that "wears out" are the bearings and they are easy to change.

Ken

[Howard Rush]

I have what I think is a 3520/14. I don’t know, Ken, I send you stuff and you just burn it up.

[Ken Culbertson]

I have what I think is a 3520/14. I don’t know, Ken, I send you stuff and you just burn it up.

Those Vortex Generators were so hot that the Fire Marshall thought they started it!
If you have one, you have to let me pay you something for it.  No rush, I am collecting the parts for a fall project when "this" gets cleared and rebuilt  FYI, they survived the fire but were buried when the roof fell in on them in my office.

Ken

[Howard Rush]

Oops. It’s not a Cobra. It’s an E-flite from which the label fell off. Never mind.

[Rick Campbell]

PM sent.