News:



  • June 21, 2025, 06:39:14 AM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Midwest Magician  (Read 1609 times)

Offline Dan Labine

  • 2013 Supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 143
Midwest Magician
« on: September 12, 2006, 11:28:59 AM »
Is anybody making a kit of the Midwest Magician? I would like to get one.

Dan
Logged
Dan
MAAC 14300

Offline Sam Laughery

  • ACE
  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 322
    • laurelhighlandsrc.com
Re: Midwest Magician
« Reply #1 on: September 12, 2006, 02:49:37 PM »
I don't know if it's the Midwest or not but Brodak has the kitted the Magician designed by Silhavy.

Sam
Logged

Offline Dan Labine

  • 2013 Supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 143
Re: Midwest Magician
« Reply #2 on: September 13, 2006, 11:04:08 AM »
Thanks. I have looked at the Brodak site hundreds of times and never saw it.. Another seniors moment.. The site shows the kit but it is not available. I have e-mailed Brodak to see if this is just temporary.

Dan
Logged
Dan
MAAC 14300

Offline JackComer

  • 25 supporter
  • Trade Count: (0)
  • Ensign
  • *
  • Posts: 31
Re: Midwest Magician
« Reply #3 on: September 13, 2006, 01:07:53 PM »
Dan

  I just received the brodak kit of the Magician from Sam's stuff & Hobbies today via Fed-Ex Ground. Check the website out. www.sshobbies.com

Jack Comer
Logged
Jack Comer
AMA 129715

Offline Dan Labine

  • 2013 Supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 143
Re: Midwest Magician
« Reply #4 on: September 13, 2006, 04:54:12 PM »
Thanks Jack.

I just got a reply from Brodak that the kit is available but the website has to be updated. How does the kit look?
Logged
Dan
MAAC 14300

Offline JackComer

  • 25 supporter
  • Trade Count: (0)
  • Ensign
  • *
  • Posts: 31
Re: Midwest Magician
« Reply #5 on: September 13, 2006, 06:38:23 PM »
Dan

   The kit is very nice. It is laser cut & the wood seems OK. I just finished joining the main spar and getting all the ribs off the balsa sheets. i am going to build it just as shown in the kit along with the hardware. I will be using a brodak .25 for power. The kit overall seems very nice!

Regards,

Jack
Logged
Jack Comer
AMA 129715

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags: