stunthanger.com

General control line discussion => Open Forum => Topic started by: Brian Gardner on March 22, 2018, 07:39:24 PM

Title: Merco 61 ABC sets
Post by: Brian Gardner on March 22, 2018, 07:39:24 PM
Ok Guys,

A few have asked for ABC sets for the Merco 61, so I'll start a list and see how we go with numbers.

I think I should probably include a laser cut gasket set with these too for backplate and cylinder. I'd go with an aluminium shim for the head.

It would be the usual piston/liner/rod/pin kit.

If you are genuinely interested indicate as such below.
Title: Re: Merco 61 ABC sets
Post by: BYU on March 22, 2018, 07:53:13 PM
Id take 3 of them



Title: Re: Merco 61 ABC sets
Post by: bob whitney on March 22, 2018, 09:27:42 PM
I will go for a set for the 61
Title: Re: Merco 61 ABC sets
Post by: Manuel Cortes on March 23, 2018, 05:12:12 AM
Hi Brian.

I will take three for Merco 61.

Thanks.

Manuel.
Title: Re: Merco 61 ABC sets
Post by: Dave Royer on March 23, 2018, 10:07:01 AM
Put me down for two.
Title: Re: Merco 61 ABC sets
Post by: Brian Gardner on March 30, 2018, 12:33:21 AM
We'll need more numbers to make this happen fellas.
Title: Re: Merco 61 ABC sets
Post by: phil c on April 02, 2018, 11:24:59 AM
If I still had a Merco 61 I'd probably order one.  It was a dual plug, cylinder+sleeve version.
Title: Re: Merco 61 ABC sets
Post by: George Waters on April 06, 2018, 06:23:33 PM
I would be interested in a set for a dual plug 61. George
Title: Re: Merco 61 ABC sets
Post by: RC Storick on April 06, 2018, 07:36:24 PM
If I still had a Merco 61 I'd probably order one.  It was a dual plug, cylinder+sleeve version.

Send me your address
Title: Re: Merco 61 ABC sets
Post by: Brian Gardner on April 08, 2018, 07:09:47 AM
added to list George

I would be interested in a set for a dual plug 61. George
Title: Re: Merco 61 ABC sets
Post by: Mike Lindler on May 27, 2018, 01:45:22 PM
I’d like two sets for .61 single plug