Merco 61 ABC sets

[Brian Gardner]

Ok Guys,

A few have asked for ABC sets for the Merco 61, so I'll start a list and see how we go with numbers.

I think I should probably include a laser cut gasket set with these too for backplate and cylinder. I'd go with an aluminium shim for the head.

It would be the usual piston/liner/rod/pin kit.

If you are genuinely interested indicate as such below.

[BYU]

Id take 3 of them

[bob whitney]

I will go for a set for the 61

[Manuel Cortes]

Hi Brian.

I will take three for Merco 61.

Thanks.

Manuel.

[Dave Royer]

Put me down for two.

[Brian Gardner]

We'll need more numbers to make this happen fellas.

[phil c]

If I still had a Merco 61 I'd probably order one.  It was a dual plug, cylinder+sleeve version.

[George Waters]

I would be interested in a set for a dual plug 61. George

[RC Storick]

If I still had a Merco 61 I'd probably order one.  It was a dual plug, cylinder+sleeve version.

Send me your address

[Brian Gardner]

added to list George

I would be interested in a set for a dual plug 61. George

[Mike Lindler]

I’d like two sets for .61 single plug