McCoy Instructions

[Phil Coopy]

I am looking for a copy of the instructions and parts callout that came with the McCoy 35 C/L version.  Anyone willing to share?

Phil

[Robert Zambelli]

Phil - I have lots of them. When I dig one out, you can have it.
e-mail me. OK?

Bob Z.

[Garf]

Here is a scan of mine.

[Steve Fitton]

Wow!  The McCoy manual calls for a 12x5 for R/C flying with the redhead 35!!

[Phil Coopy]

Thanks Robert and Garf....the scan printed out fine here.

Phil

[Garf]

I was concerned about it being clear enough to read.

[Jim Kraft]

Thank You Phil; I have five of the 35's, one 29, and two 40's. No inst. until now. They copied just fine.

[George]

Which brings to mind...on the exploded view, item 25 - Crank throw spacer. My two .35's have it but some guys have reported having engines NIB that was missing it. Is there a point when they stopped including it?

George

[john e. holliday]

It was to keep the crank pin from rubbing the back plate.  Mine didn't have it either and it was the $10.00 dollar version.  DOC Holliday

[Bill Gruby]

 There were two types of "Spacers" the early ones were Brass and the later ones were Nylon. I have replaced many of these, both Bress and Nylon for people. The early Brass ones were nothing more than a 1/8 Flathead rivit. The Nylon ones outlasted them 10:1.

 "Billy G" 

[Garf]

I have manuals for:
McCoy .60 ser. 20
McCoy .29 Super Stunt
McCoy .19 Red Head
McCoy .19 Red Head Lightning Bolt
McCoy .09 Super Stunt
McCoy .19 Super Stunt
McCoy .19 Blue Head R/C Lightning Bolt
McCoy .35 Red Head R/C
OS Pet II .09

[Phil Coopy]

Garf
If you don't mind, I'd like the red head .19 too. ( I'll put you in my will.   )

Phil

[Garf]

60 Ser. 20.

[Garf]

19 Red Head

[Phil Coopy]

Thanks eversomuch again Garf.

Phil

[George]

Thanks Garf, I downloaded them for future reference.

George

[Garf]

I have Johnson and Dooling 29 too.