stunthanger.com
General control line discussion => Open Forum => Topic started by: Paul Taylor on September 12, 2017, 10:29:42 AM
-
I have one wing panel to go and the bottom of the flaps. I chose to leave the control services on.
As it sits it has lost almost 5oz of paint.
I will get it all sanded out and put the hardware back on to see where I'm at before I moved forward.
(https://uploads.tapatalk-cdn.com/20170912/c57bb27ccebcf6a7cea248e2148a9482.jpg)
Sent from my iPhone using Tapatalk
-
BUT theres 3 Oz of Paint youve missed , in the tank bay . S?P
A c hisel , hacksaw blade & acetone & paper towel in there , maybe . Acetone loosens it up nicely usually .
Though if its well stuck down & NOT fuel impregnated , that'd explain why you left it . D F R P as it were .
Labour of love , a refinish . I hate putting holes in things with sandpaper new , let alone a refinish .
Usually end up back at bare bones in disgust , with the odd patch in the balsa required . LL~ %^@
So Well Done . H^^