stunthanger.com
General control line discussion => Open Forum => Topic started by: Randy Powell on September 08, 2014, 07:44:01 PM
-
Does anyone have a picture of a Ringmaster painted like the one on the original Sterling box?
-
Does anyone have a picture of a Ringmaster painted like the one on the original Sterling box?
Randy,
This may not help.
-
Those are some of the later ones. Here's the original:
-
Does anyone have a picture of a Ringmaster painted like the one on the original Sterling box?
okay since you didn't specify which Ringmaster let me through my photo in the hat.
Did I win? did I win?
-
okay since you didn't specify which Ringmaster let me through my photo in the hat.
Did I win? did I win?
I've seen it! It looks even better "in the balsa!" y1
Roger V.
-
(http://i275.photobucket.com/albums/jj307/afml_photos/Ringmaster_zps9cb6f376.jpg)
"Tight Lines!" H^^
Wes
-
Keep in mind the lighter Blue you see on the fwd fuse. is just a prop shadow.
Black, White and Red would look good too!
-
Here's mine,
I tried to copy the box art as close as possible. Who knows what actual color it was supposed to be in 1950...
http://i.imgur.com/J1Hr4Hh.jpg
Ron
-
Nice!
-
Kinda close, but no cigar!
Joe
-
Well, interesting spread. I'm looking to get an official finish scheme. Thanks!
-
Don't think I ever got a picture of mine but believe you saw it at one of the SR contests 20 years ago. I covered the wing/stab/elevator with Coverite's Silkspun Coverite and finished with a couple of coats of Black Baron clear - I think simply a urethane varnish. Fuselage was a blue fabric Coverite I painted an insignia blue dope. It looked pretty period authentic.
Only surviving photo I have is of the inboard wing with the red/clear MonoKote checkerboard trim.
-
Hi Randy,
According to the original (1st kit) plans, the colors were: black nose doublers, red fuselage/rudder-fin, Diana Cream wings and stab/elev., black and red checkerboards on inboard wing.
I painted mine in this manner and there were some pictures here somewhere...............
BIG Bear
RNMM/AMM
-
For those of you wondering, I'm considering a new Ringmaster Deluxe (with a few changes) and thought if I did it, I'd paint is like the original S-1
-
Have you considered posing this question on the Brotherhood of the Ring?
Ron
-
For those of you wondering, I'm considering a new Ringmaster Deluxe (with a few changes) and thought if I did it, I'd paint is like the original S-1
all of my S1's are wild colors, so im no help. this sounds like a super cool idea, Randy!
-
Uncle Mikey's painting nailed the "Original" kit's call out for colors. Only difference is two rows of black checkerboard in the center of the red checkerboard on the inboard wing. I used Sig Diana Cream so it is a touch darker than the color Mike used on the wings.
There is really nothing else to discuss since this comes from a first run kit. The engine shown as "original" was a K&B Torpedo.
BIG Bear
RNMM/AMM