stunthanger.com

General control line discussion => Open Forum => Topic started by: Greg L Bahrman on August 12, 2009, 11:57:05 AM

Title: line III
Post by: Greg L Bahrman on August 12, 2009, 11:57:05 AM

Looking for LINE III.......TIA

Title: Re: line III
Post by: Mike Anderson on August 12, 2009, 12:56:17 PM

You are almost there already --  :)

http://www.stunthanger.com/temp/LineIIISetup.exe

Title: Re: line III
Post by: Greg L Bahrman on August 12, 2009, 01:00:47 PM

Thanks..........Right now my Cardinal Profile leadouts are set 1 inch behind the CG. Am I close ??.....I just checked with line III and it says I should be at .865 behind the CG so we are close. Thanks Mike A. and Bob Reeves........Too cool, it works great..............

Title: Re: line III
Post by: Larry Cunningham on August 12, 2009, 02:15:20 PM

Wow. Sounds like a very useful program!

L.

"He who conquers himself is the mightiest warrior." -Confucius

Title: Re: line III
Post by: Paul Taylor on August 12, 2009, 02:44:39 PM

I was messing around with.
Then change the lap times and line length. Wow!

A 52 oz stunter with a ground speed of 158.8 mph and line tension of 59.75 pounds!!!

Hang on for 8 minutes.

Title: Re: line III
Post by: Greg L Bahrman on August 12, 2009, 07:02:39 PM

I was wondering why that guy had 8 ft. arms?....Reminds me of plastic man my favorite childhood hero.

Title: Re: line III
Post by: dennis lipsett on August 13, 2009, 03:08:34 PM

Quote from: Greg L Bahrman on August 12, 2009, 07:02:39 PM

I was wondering why that guy had 8 ft. arms?....Reminds me of plastic man my favorite childhood hero.

Hummm,
Wasn't plastic man  published about 1948/9 to about the mid 50's. A very 'campy' comic if I remember it correctly. The shades were so cool before it was ok to be cool.