stunthanger.com

General control line discussion => Open Forum => Topic started by: rustler on June 19, 2006, 01:26:26 PM

Title: Line diameters
Post by: rustler on June 19, 2006, 01:26:26 PM

What ae the line thickness regs. for AMA rules (C/L Stunt) please? Particularly want to know between 60 and 90 size engines.

Title: Re: Line diameters
Post by: RandySmith on June 19, 2006, 02:57:28 PM

HI Ian

The 60 and up to 76s can run a  .018 lines
over sized motors 77 up to .9125  have to use  .021

Regards
Randy

Title: Re: Line diameters
Post by: RC Storick on June 19, 2006, 02:59:50 PM

Quote from: RandySmith on June 19, 2006, 02:57:28 PM

HI Ian

The 60 and up to 76s can run a  .018 lines
over sized motors 77 up to .9125  have to use  .021

Regards
Randy

I thought anything over a .41 up to a .76 had to use .018

Title: Re: Line diameters
Post by: Ron King on June 19, 2006, 03:53:38 PM

Sparky,

You are correct. We use .018s between .4029 and .7628 CID.

I think Randy was simply answering the original question.

Ron

Title: Re: Line diameters
Post by: rustler on June 20, 2006, 12:46:59 PM

Thanks everybody. Regards,