Author Topic: Lee's Machine shop price list (Read 5580 times)

RC Storick · « **on:** October 05, 2006, 04:55:52 PM »

Lee's machine shop price list has been added to the main page. These items are a must for the avid stunt flier. Try his syringes TRICK!!! http://www.stunthanger.com/lee_machine_shop.htm

Tom Dugan · « **Reply #1 on:** October 05, 2006, 05:28:49 PM »

What is a Propeller Scribe? It's the first item on Lee's page.

Thomas

RC Storick · « **Reply #2 on:** October 05, 2006, 06:14:31 PM »

A prop scribe is something to make each blade exactly the same length. Works great.

peabody · « **Reply #3 on:** October 05, 2006, 07:23:38 PM »

making blades the same length is the first step in balancing, or should be....

James Lee · « **Reply #4 on:** October 05, 2006, 07:57:08 PM »

Golly, I sure have a great bunch of salesmen out there!!

Hope they don't want too much commission!!

thanks
Jim

Bill Little · « **Reply #5 on:** October 05, 2006, 09:26:37 PM »

Quote from: James Lee on October 05, 2006, 07:57:08 PM

Golly, I sure have a great bunch of salesmen out there!!
Hope they don't want too much commission!!
thanks
Jim

Ahhhhhh......... we finally get the low down on the "Senior" Lee!

Glad to see that Sparky put your site on the links. After having seen your planes for all these years, I know full well that any device you make will be top drawer.

BTW: How about a picture (and description of useage) for you line wrapper?

Thank you, Sir!
Bill <><

RC Storick · « **Reply #6 on:** October 05, 2006, 09:28:09 PM »

The line wrapper is slick! I had to have one last year and I convinced him into making them again.

Bill Little · « **Reply #7 on:** October 05, 2006, 09:30:27 PM »

Quote from: Robert Storick on October 05, 2006, 09:28:09 PM

The line wrapper is slick! I had to have one last year and I convinced him into making them again.

I've heard about Jim's line wrapper for years, but I have never had the privilege of seeing one!

Bill <><

Keith Spriggs · « **Reply #8 on:** October 06, 2006, 12:36:03 AM »

James, DON'T read this.

I met this fella for the first time at the Tulsa contest last Sunday. Super nice guy and looks like very high quality merchandise.

Bob Reeves · « **Reply #9 on:** October 06, 2006, 02:49:29 AM »

Jim,

Can you take PayPal? I intended to get back around to your goodies while you were in Tulsa but didn't make it..

Bob

James Lee · « **Reply #10 on:** October 06, 2006, 07:09:35 AM »

Bob
PayPal is a yes.
Thanks
Jim

catdaddy · « **Reply #11 on:** October 06, 2006, 07:48:07 AM »

I've got almost everything Jim sells including the most Hi-zoot of all gizmos the gasket cutter. I bought the line wrapper at this years Tulsa contest. It is very slick as well.

Jim is a wealth of knowledge too. He filled me in and marked up a set of SIG Mustang plans at the Tulsa contest.

Thanks again Jim!

Everybody support Jim as much as you can.

Leester · « **Reply #12 on:** October 08, 2006, 10:04:05 AM »

How about a picture of the line wrapper.

Jim Oliver · « **Reply #13 on:** October 08, 2006, 12:44:45 PM »

Ditto on the line wrapper pix--I need one, maybe this is it.

Jim

Greg L Bahrman · « **Reply #14 on:** October 08, 2006, 02:41:52 PM »

Quote from: Jim Oliver on October 08, 2006, 12:44:45 PM

Ditto on the line wrapper pix--I need one, maybe this is it.

Jim

MEE TOO !!!

James Lee · « **Reply #15 on:** October 08, 2006, 07:36:50 PM »

Line wrapper picture, maybe
Jim

RC Storick · « **Reply #16 on:** October 08, 2006, 07:42:22 PM »

You clip it on the line and spin it around under centrifugal force.Really slick ,makes a nice wind.

James Lee · « **Reply #17 on:** October 08, 2006, 07:43:21 PM »

The wire is fed from the modified clothes pin, tensioned by the bolt through the spool. A length is held against the lines to be wrapped and then looped around the grommet. A few wraps are made around the lines then the wire is drawn back onto the spool, bringing the wrapper up to the lines being wrapped. The fun begins...

While holding the lines and grommet tightly, swing the wrapper back and forth , then around the wires to lay on the wrapping.... Yes, I know, clear as mud... $:-\$ I really am working on getting a video on disc...

Thanks
Jim

RC Storick · « **Reply #18 on:** October 08, 2006, 07:46:59 PM »

I have you on stunt flier video magazine would you like me to upload a clip? I would have to ask Bob Hunt first.

James Lee · « **Reply #19 on:** October 08, 2006, 08:13:21 PM »

Bob
You have my permission! Of course you need to get Bob Hunts approval too!
thanks
Jim

Tom Niebuhr · « **Reply #20 on:** April 26, 2018, 05:14:39 PM »

Jim,
Can you download a demo using the line wrapper?

Tom Niebuhr
blueskymodels@mypbmail.com
469.450.7093

proparc · « **Reply #21 on:** April 26, 2018, 06:30:49 PM »

I have worked with James on my OS Max 55AX project and let me tell you, James Lee will take good care of you!!