stunthanger.com

General control line discussion => Open Forum => Topic started by: frank williams on October 16, 2017, 04:31:33 PM

Title: LA46 and LA40
Post by: frank williams on October 16, 2017, 04:31:33 PM: Are the backplates for the LA46 and LA40 the same?
Title: Re: LA46 and LA40
Post by: BYU on October 16, 2017, 04:37:12 PM: Quote from: frank williams on October 16, 2017, 04:31:33 PM
Are the backplates for the LA46 and LA40 the same?

Yes
Title: Re: LA46 and LA40
Post by: frank williams on October 16, 2017, 06:37:54 PM: Thanks, I thought so.
Title: Re: LA46 and LA40
Post by: RandySmith on October 16, 2017, 09:39:15 PM: Also same as the FP 35 and FP 40

Randy
Title: Re: LA46 and LA40
Post by: Perry Rose on October 17, 2017, 05:54:11 AM: Curtis Shipp has new ones.
Title: Re: LA46 and LA40
Post by: Avaiojet on October 17, 2017, 06:47:20 AM: Quote from: Perry Rose on October 17, 2017, 05:54:11 AM
Curtis Shipp has new ones.

Yes, and they are made of aluminum.

CB
Title: Re: LA46 and LA40
Post by: George Albo on October 17, 2017, 08:44:22 AM: Curtis Shipp has back plates for the OS 46La at $12 each. $3.00 shipping

Here's his email: m14m21@bellsouth.net

George Albo
Title: Re: LA46 and LA40
Post by: john e. holliday on October 17, 2017, 09:05:53 AM: And they look and fit better than factory ones. D>K
Title: Re: LA46 and LA40
Post by: Peter Grabenstein on October 21, 2017, 08:00:30 PM: I fly 3 Curtis Shipp backplates (all OS La46) in 3 different planes which I'm very happy with.
It's just the BEST what you can do to your OS La's.
Forget the black plastic bs they will cause Problems sooner or later in the Long run.

Peter
GER-1223
Title: Re: LA46 and LA40
Post by: Manuel Cortes on January 26, 2018, 01:13:23 PM: Hi all.

I received today four alu LA 46 Backplates from Curtis Ship.
Greatly impressed with the excellent quality. In my opinión a very good improvement for the LA 46 plastic unit. Awesome qty/cost ratio.

Hope it helps.

Kind regards from Spain.

Manuel.
Title: Re: LA46 and LA40
Post by: cory colquhoun on January 28, 2018, 04:32:45 AM: How do I get 2 of these back plates, is Curtis on s SH?

Cory
Title: Re: LA46 and LA40
Post by: pmackenzie on January 28, 2018, 07:18:30 AM: Quote from: cory colquhoun on January 28, 2018, 04:32:45 AM
How do I get 2 of these back plates, is Curtis on s SH?

Cory

Old post, but might help :)

https://stunthanger.com/smf/open-forum/new-parts-for-st-46/msg91767/#msg91767
Title: Re: LA46 and LA40
Post by: Dan McEntee on January 28, 2018, 08:11:35 AM: Quote from: cory colquhoun on January 28, 2018, 04:32:45 AM
How do I get 2 of these back plates, is Curtis on s SH?

Cory

There is a more recent thread over on Stuka Stunt with Curtis' current contact information. He's not very active on the forums, so a direct email is probably the best way to contact him. He has a busy machine shop business so give him some time to respond.
Type at you later,
Dan McEntee
Title: Re: LA46 and LA40
Post by: Manuel Cortes on January 28, 2018, 11:15:41 AM: In my personal experience, from Spain, Curtis is a very friendly supporter.

Email him to m14m21@bellsouth.net m14m21@bellsouth.net

He will attend you in a very pleasant time.....faster than Spanish post service......

Regards.
Title: Re: LA46 and LA40
Post by: cory colquhoun on January 28, 2018, 02:06:37 PM: Thanks

Cory
Title: Re: LA46 and LA40
Post by: BYU on January 28, 2018, 03:47:12 PM: Quote from: cory colquhoun on January 28, 2018, 04:32:45 AM
How do I get 2 of these back plates, is Curtis on s SH?

Cory

Send him $24 plus $3 for shipping ($27) by Paypal (his PayPal email is mentioned above) , mention what size you want in the PayPal message (La 46, La25 or LA 15) and you will usually get them within 10 days.

He is often too busy to reply to email requests.