Klett Hinges Continued

[Bob Reeves]

I looked but couldn't find the posting rules, if this is against board policy please feel free to delete.

The Klett Hinge deal is now over, if you haven't received a conformation email I ran out of hinges before I was able to get to you.

After all was said and done I ended up with an odd number of hinges left over (19) which I have listed on eBay. If you missed out on the offering here is a chance to get what may be the last available Klett Hinges on the planet.

http://www.ebay.com/itm/-/161858877429?ssPageName=ADME:L:LCA:US:1123

[Motorman]

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXD941&P=7



MM

[Randy Cuberly]

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXD941&P=7



MM

The Dubro hinges are usable but never as free moving or precise as the Klett.

Randy Cuberly

[Brett Buck]

The Dubro hinges are usable but never as free moving or precise as the Klett.

   They work OK, but you have to spend literally hours cleaning the flash off of them, after having cut and removed the pins, easily 5-6 minutes a hinge just to clean them up.

 Jim Aron uses something different that seems to be pretty good. I forget the brand.

    Brett

[James Strickland]

E-mail sent for hinges, waiting for your response.

Thanks, James Strickland

[Bob Reeves]

E-mail sent for hinges, waiting for your response.

Thanks, James Strickland

You and about 20 others. 
If you didn't hear from me, it simply means enough people sent requests ahead of you that I ran out of hinges before I was able to get to your order. I tried real hard to explain the process as best I could both in the original thread and in the Classified thread. I was still receiving orders even after I posted that I could not fill all the orders and why I asked Robert to close the two threads.